Posts Tagged ‘Sugar Hill’

« Older Entries

Atlanta HVAC Guide: Green Your Home Ideas

Monday, May 7th, 2012

Energy costs and depleted supplies force us to consider alternatives to how we lived 20 and 30 years ago. This transformation of thinking is most prevalent in our homes.  Not only are the habits of our lifestyles under consideration, but the very structure of our homes as well.  From materials to furnishings, houses are being transformed.

Remodel versus New Construction

The amount of open land available for development is less than before, so creativity is being utilized to design more compact developments, concentrating homes into multi-family structures and creating communities with shared spaces.

If you need more square footage for a growing family, staying put by increasing the footprint or adding a second story is viewed as more green than starting fresh on a new plot of ground.  In either case, careful consideration to the materials and systems used can have a significant impact on the environment.

Changing Habits and Habitats

From acoutrements to the house design itself, each decision to change an appliance or upgrade the finishes has greener impacts, no matter the choice of color.  Something so simple as converting light bulbs from incandescent to longer-lasting and more efficient compact florescents (the twisty tube ones) is becoming required in many communities and saves serious dollars in utility costs.

Hot water heaters can be combined with the boiler to share the energy.  More energy efficient glass can bring in more solar heat and light and hold it there longer.  Bamboo flooring only takes five years to grow, but can last 60, allowing our supply of trees to replenish.  Getting an energy efficient air conditioner can lower you energy bills during the summer.

Greening Your Home

Transforming the colors on our walls with odorless zero VOC  paints makes the chore fun to do yourself (instead of smelly and causing a headache), satisfying a need to feel accomplished and useful.  Composting left-over food to nourish our vegetable garden contributes to the effort of awareness far more emphatically than just flushing waste out of mind down the garbage disposal.

For information about how to make your Atlanta HVAC system more energy efficient, give Triad Mechanical a call today!

Tags: , , , , , ,
Posted in Air Conditioning, Energy Savings | Comments Off

Sugar Hill Heating Installation Question: What Exactly Are High Efficiency Boilers?

Friday, February 17th, 2012

You have already read plenty about how energy costs are rising. You know plenty well that heating your Sugar Hill home is a substantial expense, and that the cost of running a boiler is constantly on the rise.

But as technology has gotten better, so have boilers become more efficient at providing heat. It stands to reason that a more efficient boiler is one that costs less to run…but what does “efficient” really mean in the context of boilers? What makes a boiler “high efficiency”?

 What Is a High Efficiency Boiler?

All boilers are rated according to a standardized system of rating efficiency, called the Annual Fuel Utilization Efficiency (AFUE). Essentially, this rating tells you how much heat energy is produced by a boiler compared to how much energy it draws. The higher a boiler’s AFUE rating, the more efficient it is.

For a boiler to be called high efficiency, it must carry an AFUE of at least 90%. For basis of comparison, older systems carry an AFUE of about 70%, while mid-efficiency systems run at about 82%.

In addition, a high efficiency system has a second heat exchanger for capturing and condensing flue gases, as well as a closed combustion system.

These three things — an AFUE of 90% or above, condensing flue gases and closed combustion – define a high efficiency boiler.

The initial investment in a high efficiency boiler can be costly, but the savings over time in heating bills make it well worth the expense.

If you would like a high efficiency boiler installed in your home, give Triad Mechanical a call today!

Tags: , , , , , ,
Posted in Heating | Comments Off

Sugar Hill Heating System Replacement – Another Happy Customer!

Wednesday, January 18th, 2012

When you are upgrading your heating system, you need a contractor you trust. There are a lot of factors to take into account when you buy a new system, from AFUE ratings to size, so having someone who is knowledgeable is essential when trying to reach the right decision.

At Triad, we believe in working hard and delivering unparalleled customer service. Our technicians will be on time and take pride in their work; you never have to worry about the quality you receive from us. We also do our best to answer any questions you might have. Here is what Marie M in Sugar Hill wrote to us about her heating replacement:

We were very pleased with our experience with the guys at Triad. We opted for the higher efficiency unit to meet the current government requirements for rebate and we are so glad we did. The unit has done a much better job this record cold winter than the old system ever did in the previous 12 years. Triad’s people are knowledgeable, efficient, and polite. We will call on them again.

- Marie M. in Sugar Hill

Thanks Marie! We are very proud of our team and we are glad that we were able to help. Stay warm this winter!

Tags: , ,
Posted in Heating | Comments Off

Nicholson Heating Installation Tip: Comparing High-Efficiency and Mid-Efficiency Furnaces

Wednesday, January 4th, 2012

Whenever you are in the market for a new furnace for your Nicholson home, there are many models to choose from.  Many of the furnaces manufactured within the last few years are high-efficiency furnaces with a high AFUE rating (AFUE measures the amount of fuel the furnace converts into heat). When people refer to a mid-efficiency furnace, they are usually talking about older furnaces.

Single-stage furnaces were considered to be an efficient heating system when they were manufactured, but compared to newer furnaces, they use up a lot more energy than they need to. Single-speed furnaces are designed to run at full capacity until the temperature inside the home reaches the thermostat setting. After they shut off, the home not only loses heat, but the furnace will also take longer and burn more fuel when it cycles on again.

Newer, two-speed and multispeed models run consistently at lower speeds, and the ones with variable-speed blowers are even more efficient because they can operate at various levels. These models will also automatically adjust to the thermostat to maintain a constant temperature, which saves energy by keeping the home at a consistent temperature so that there’s little heat loss.

When shopping for a new furnace, keep in mind that the AFUE ratings for multispeed and variable-speed furnaces only determine the efficiency of the actual furnace. If you are upgrading your old, mid-efficiency furnace to a high-efficiency furnace, you should make sure that your Nicholson home is properly insulated and sealed.  You could also consider upgrading any older doors and windows to more efficient double-paned ones, or you can also install storm doors and windows.

Tags: , , , , ,
Posted in Heating | Comments Off

Heating System Ventilation 101: Basic Guidelines from Covington

Monday, January 2nd, 2012

Maintaining Proper Ventilation for Combustion Systems

Anytime you maintain, retrofit, or replace a gas heating system in your Covington home you also need to be concerned with air quality. Combustion air is needed by all oil and gas heating systems to support the combustion process. This air is provided in some homes by unintentional air leaks, or by air ducts that connect to the outdoors. The combustion process creates several byproducts that are potentially hazardous to human health and can cause deterioration in your home. You can protect yourself from these hazards, as well as maintain energy efficiency, by ensuring that your chimney system functions properly and that your gas heating system is properly ventilated. In some cases, installing a sealed-combustion furnace or boiler can also help.

Chimneys

Properly functioning chimney systems will carry combustion byproducts out of the home. Therefore, chimney problems put you at risk of having these byproducts, such as carbon monoxide, spill into your home.

Most older gas furnaces and boilers have naturally drafting chimneys. The combustion gases exit your Covington home through the chimney using only their buoyancy combined with the chimney’s height. Naturally drafting chimneys often have problems exhausting the combustion gases because of chimney blockage, wind or pressures inside the home that overcome the buoyancy of the gases.

Atmospheric, open-combustion furnaces and boilers, as well as fan-assisted furnaces and boilers, should be vented into masonry chimneys, metal double-wall chimneys, or another type of manufactured chimney. Masonry chimneys should have a fireclay, masonry liner or a retrofitted metal flue liner.

Many older chimneys have deteriorated liners or no liners at all and must be relined during furnace or boiler replacement. A chimney should be relined when any of the following changes are made to the combustion heating system:

When you replace an older furnace or boiler with a newer one that has an AFUE of 80% or more. These mid-efficiency appliances have a greater risk of depositing acidic condensation droplets in chimneys, and the chimneys must be prepared to handle this corrosive threat. The new chimney liner should be sized to accommodate both the new heating appliance and the combustion water heater by the installer.

When you replace an older furnace or boiler with a new 90+ AFUE appliance or a heat pump. In this case, the heating appliance will no longer vent into the old chimney, and the combustion water heater will now vent through an oversized chimney. This oversized chimney can lead to condensation and inadequate draft. The new chimney liner should be sized for the water heater alone, or the water heater in some cases can be vented directly through the wall.

Other Ventilation Concerns

Some fan-assisted, non-condensing furnaces and boilers, installed between 1987 and 1993, may be vented horizontally through high-temperature plastic vent pipe (not PVC pipe, which is safely used in condensing furnaces). This type of venting has been recalled and should be replaced by stainless steel vent pipe. If horizontal venting was used, an additional draft-inducing fan may be needed near the vent outlet to create adequate draft. Floor furnaces may have special venting problems because their vent connector exits the furnace close to the floor and may travel 10 to 30 feet before reaching a chimney. Check to see if this type of venting or the floor furnace itself needs replacement. If you smell gases, you have a venting problem that could affect your health. Contact your local utility or Covington heating contractor to have this venting problem repaired immediately.

Chimneys can be expensive to repair, and may help justify installing new heating equipment that won’t use the existing chimney.

Tags: , , , , ,
Posted in Heating | Comments Off

Question from Druid Hills: What is a Gas Furnace Draft Hood?

Wednesday, December 14th, 2011

As every Druid Hills HVAC contractor knows, a draft hood is a necessary part of any gas burning appliance. For a gas furnace in particular it ensures steady air flow to the burners to avoid flares or the pilot light being put out by fluctuation in temperature and air flow.

What the Draft Hood Does

The draft will change in the chimney as exhaust vents towards it – especially when going from cold air to hot. A draft hood is placed above the upper most part of the gas furnace to draw air into the chimney and makes it possible to draw more or less air through the chimney as necessary to create a constant flow.

This makes it possible for the burner to enjoy consistent air flow without any wind gusts or sudden temperature spikes or drops. Hot air, if not put through a draft hood would create a strong air flow through the burners.

A draft hood cools the air as it is released by the burners from 500 degrees F to between 300 degrees F and 350 degrees F. The cooling needs to be carefully calibrated to avoid condensation build up in the chimney however – a problem that occurs when the temperature gets too low.

Maintaining Pressure

The draft hood is a part of a larger system designed to maintain air flow to the chimney. For every cubic foot of gas burned, the furnace needs to have 15 cubic feet of air for combustion and another 15 cubic feet of air for dilution. A draft hood and the rest of the ventilation system make it possible to put a furnace that has many thousands of BTUs in the basement of your home and still supply it with enough air to burn gas and dilute the exhaust before it enters the chimney.

For all of these reasons, if you see your pilot light flickering irregularly, notice a backflow of exhaust or a burning smell in your furnace room, it’s important to call a Druid Hills professional who can inspect and repair the problem before it becomes any worse. Not only can gas burner exhaust contain high levels of carbon monoxide, it can be bad for the device and the chimney if it doesn’t vent properly.

Tags: , , , , ,
Posted in Heating | Comments Off

Troubleshooting Your Heat Pump Problems in Buckhead

Monday, December 5th, 2011

If your Buckhead home’s heat pump isn’t working properly, there are a number of things that might be wrong. But, where do you start and how do you solve these problems quickly and inexpensively? Here are some tips for common heat pump problems.

Low Air Flow

Your heat pump is designed to provide steady air flow to the entire house. When it was originally installed, the technician sized it to do so. If it suddenly stops providing enough air flow to your entire house or if the air flow it provides isn’t as comfortable as you’re used to, something is probably wrong.

More specifically, there is likely an issue with the heat pump itself since the device will compensate for most external problems by running longer and harder. A quick inspection will often rule out serious problems, so you should have someone inspect your device as soon as you notice a problem.

Leaky Duct

If there is an external problem, such as leaky ductwork, it tends not to be as noticeable right away. Often, when ducts are leaking, air flow problems will occur only in certain rooms of your home. Even then, the heat pump might be able to maintain the right temperature in those rooms – you’ll just have a higher energy bill because of the energy loss in the ductwork.

The best way to determine what is happening and how best to tackle the problem is to have someone test your ductwork for leaks, a relatively quick process.

High Energy Bill

If your energy bill suddenly increases dramatically, it is usually due to energy loss somewhere in the transfer between the heat pump and the rooms of your home. Leaky ducts can be the culprit, but so too can the air handler or the heat pump itself. If you notice a sudden increase in your energy bill, look for other symptoms like uneven heating or cooling in certain parts of your home or noises coming from the ductwork or your air handler.

No matter what other symptoms accompany the increase, you probably need repairs. Your home may still be comfortable now, but the heat pump can only make up for the problem for so long and in the interim, it is being put under excessive stress that reduces its lifespan.

Tags: , , , , ,
Posted in Heat Pumps | Comments Off

HVAC Safety the Whole Family Should Know: A Guide from Sugar Hill

Wednesday, November 2nd, 2011

If you think the most important thing your Sugar Hill home’s heating and cooling (HVAC) system can do is to provide indoor comfort, you are right. But there is another thing an HVAC system does that is very important and it affects your entire family. It provides a safe indoor environment, too.

Besides warmth in the winter, a finely-tuned HVAC system can clean and filter the air you breathe. That’s important to people who suffer from allergies and is especially important for minimizing the spread of germs that cause colds and the flu. The key phrase in this paragraph is finely-tuned. If your HVAC system is not working correctly – out of tune – it can cost you a great deal in monthly utility bills and can be harmful to your health.

It is important for you and your family members to understand the basics of HVAC system maintenance so you can all understand the symptoms of improper maintenance and its consequences. For example, if anyone in your home is suffering from flu-like symptoms or are constantly drowsy or listless, they may be suffering from the a silent killer: poisonous carbon monoxide gas. This gas is formed during incomplete combustion of fossil oils like natural or propane gas. A malfunctioning furnace can emit carbon monoxide gases and you may never even realize it, until it is too late. Long-term exposure to the gas can cause brain damage and/or chronic sleepiness. It some cases, it can even cause death.

You may be able to diagnose the problem, but you aren’t qualified to test and repair a furnace that is creating deadly carbon monoxide gas. Your best bet is to call a qualified HVAC contractor who can diagnose the furnace and offer repair or replacement suggestions. But there are things you can do to prevent the build-up of carbon monoxide gas.

Check all exhaust vents, like chimneys and flues for any blockages. A blocked or partially blocked vent can cause the build-up of carbon monoxide gas. And never, EVER, use a gas or propane powered heater in an unvented area of your home. These types of heaters create various levels of carbon monoxide gas that needs to be circulated out of each room and replaced with clean, fresh air. So, your family can actively ensure that there is no debris, bird’s nests, animals, leaves, or snow in the ventilation system.

You can also “help” your HVAC system by keeping vents clean by vacuuming dirty vent grilles and, in general, keeping the home clean. The cleaner the home, the easier it is for your furnace to do its job and the easier it will be for you and your family will breathe. These are a few easy maintenance tips will keep you and your family warm – and safe – this fall and winter.

Tags: , , , , ,
Posted in Heating | Comments Off

Malfunctioning Heat Pump Tips (and Happy Halloween Weekend!)

Friday, October 28th, 2011

Everyone at Triad Mechanical wishes you a Happy Halloween Weekend! Have a great time as a ghost, a goblin, or anything in between! And since nothing is more scary than when you heating system stops working, here are some things you should do if you have a malfunctioning heat pump.

In a perfect world, you would never have to worry about things like malfunctions or repairs. Everything would just work without ever needing to be maintained or fixed, and you could spend your time on energy on more enjoyable pursuits.

Unfortunately, no such perfect world exists. Things wear out and break down, often at the least opportune time. And of course, your heat pump is not immune. Despite being a great all around machine, a heat pump can malfunction, just like anything else.

But how can you know whether your heat pump is not working right? Here are some signs and symptoms that are often indicative of common heat pump problems:

  1. Too Much Noise – Whether emanating from your car or your usually quiet heat pump, noises are often the first sign that something is amiss. You should expect your heat pump to make some noise; the compressor and air handler are two culprits. However, if it starts making more noise than it did before, something may be up. Sometimes this is as simple as some loose fittings, but it’s still something that should be checked out.
  2. The House Is Too Cold – Obviously, if you get a heat pump to heat your house, you expect it to do just that. So, if your home is too chilly, you know something is amiss. If it’s way too cold, the heat pump may not be running at all, which can be the result of a serious malfunction. If it is only a few degrees below where you set it, it may be a different problem. It could be that something is malfunctioning in the heat pump, but it could also be that the outside air is too cold for the heat pump to keep the house warm. In that case, the best solution is supplemental heating.
  3. The Heat Pump Turns Off Too Soon – If your heat pump seems to be shutting off too quickly, it may be short cycling. That means that it is turning off before getting through its entire heating or cooling cycle. Frequently this is simply caused by dirt or debris around the outdoor coil, in the air handler or in the filter. Check these areas out and clean them. In general, you will want to keep the various components of your heat pump clean in order to ensure the best performance.

These are just some of the main symptoms of common problems. Other things can go wrong with your heat pump, although it is not very likely. As a general rule, if you notice your heat pump performing strangely or doing something it hasn’t done before, it’s best to get it checked out by a professional.

Tags: , , , , , ,
Posted in Heat Pumps | Comments Off

How Heating Zone Control Can Save You Money in Roswell

Monday, October 17th, 2011

The costs of heating your Roswell home have risen dramatically over the past couple of decades, thanks to higher energy costs and price increases for heating equipment. Despite the strides made in energy efficiency, there seems to be no end in sight for the steady rise in heating equipment operating costs.

Now add in the cost of heating unoccupied areas of your home, such as basements, hallways, or extra bedrooms, and the energy costs go even higher. Most of these costs are unnecessary and avoidable if you have the time and a small investment in a well-planned heating “strategy” for your home. This strategy involves using heating zone controls to make the most efficient use of your heating system.

In a nutshell, here is how heating zone control works. The rooms in your home are connected to your heating system by a series of ductwork, which carries heated and conditioned area to all corners. But some of these areas may not need to be heated as much – or possibly at all – compared to other rooms in your home. For example, do you need heat in your kitchen but not in your basement? Most people would answer yes. Or they may say they need more heat in the kitchen and some, but not very much heat in the basement.

Or try this: do most people in your house spend more time in one room, such as the family room, and less time in their bedrooms? If so, why would it be necessary to heat the bedrooms all of the time? In order to deliver heat to areas in your home that need it the most, the ductwork to these rooms should always be “open.” Ductwork to other unused areas of your home can be “closed” during various times of the day.

Opening and closing of ductwork and airflow is achieved by zone controls. A zone control is installed in the home which electronically or wirelessly opens and closes “dampers” in the ductwork, depending on the heating demand. You can divert heat to areas of your home using zone control and dampers while decreasing the heating load on your furnace. This type of heating zone control will move heated air to where you want it. Simply put, you are not heating areas of your home that don’t need the heat.

The heating zone controls can be programmed for various times of the day, too. For example, you may not need any heat in your basement while you sleep or when you are away from home. You can program the damper in your basement’s ductwork to remain closed or partially open during these times. In a sense, the heating zone control in your home acts like a programmable thermostat – only it uses a series of dampers to control indoor temperatures.

The next time you walk into an unused part of your home, think about how much money you are spending to heat it. It makes sense to consider heating zone controls. The initial costs of installing zone controls and dampers are minimal and the payback in energy savings and comfort are substantial.

Tags: , , , , ,
Posted in Heating | Comments Off

« Older Entries