Posts Tagged ‘Roswell’

Things to Look for in an Atlanta Central Air Conditioning System

Monday, April 2nd, 2012

When it comes time to buy a new air conditioner in Atlanta, there are a lot of factors to consider. Beyond the obvious issues like cost, you need to consider how that system will operate once installed. What factors are most important to you? Control? Comfort? Cost? Here are some things to consider when selecting your new Atlanta air conditioner.

  • SEER – The Seasonal Energy Efficiency Rating measures the efficiency of your cooling system during a typical hour. To calculate this number, we divide the total BTUs of cooling produced by the watt/hours of electricity consumed during that hour. So, the higher your SEER rating, the less electricity is used to produce the same amount of cooling. Standard SEER ratings are between 11 and 15 these days, but some high end units have SEER ratings of up to 20.
  • Controls – How much control do you want of your system? Many air conditioners these days come with multiple speeds, allowing you to control the air flow as well as the amount of energy consumed by the device in cooling. Do you want it to constantly blow at 100% or would you like it to run at 50% to reduce consumption. Another option available in central air conditioners is zone control, allowing you to determine which rooms receive cooling with separate thermostat settings.
  • Dehumidification – Air conditioners are dehumidifiers by default, but not every system offers the same degree of humidity control. Some simply remove moisture as part of their regular operation. Others have more advanced controls to provide specific humidity control throughout the year.
  • Sound Dampening – Newer models have sound dampening features like insulation and vibration isolation to reduce sound. These are also great for weather protection and help to maintain your system for more years.
  • Refrigerants – Most new air conditioners now use the R410-A refrigerant which will be required in all new units starting in 2020, but there are some lower cost units still using R-22. Check to make sure you have the environmentally friendly coolant offered by newer models.

A good central air conditioner will keep your family cool and comfortable for years to come so make sure to do your research and choose a model that fits your needs in advance. If you’re not sure about any one feature, Triad Mechanical can help you make your decision.

Tags: , , , , ,
Posted in Air Conditioning | Comments Off

Lilburn Heating Contractor Guide: Simple Steps to Prevent Heat Loss

Monday, February 13th, 2012

There are two fundamental ways to make your Lilburn house warmer. One is to generate heat, which is the job of your furnace or boiler. The second is to keep the warm air in — and thereby keep cold air out — which is the job of your system of insulation.

The idea that the physical structure of a home can be a component of the HVAC system is one that is often overlooked, but when you think about it, it makes sense. The insulation, windows, doors and building materials that comprise your home are designed to keep the place warm against the cold and vice versa.

So, when bolstering your HVAC system to promote efficient heating, it is important to also consider heat loss and how to prevent it. This is a process that can get out of hand if you go overboard, so it is important to prioritize. Let’s look at the top 3 places to start when trying to prevent heat loss.

  1. Doors and Windows:  If you have older doors and windows, they could be a source of heat loss in your house, even if they are always closed. Replacing your windows and door with Energy Star rated ones will make sure that you are not losing heat to the outside AND still getting all the heat energy from the sun. Installing storm windows or putting up heavy curtains in winter can also help cut down on your heat loss.
  1. Seal off drafts. If any opening to your house, such as windows and doors, is improperly sealed, improperly installed or if the surrounding construction is deteriorating, you can lose a lot of heat. Check any drafts that you notice that might indicate a problem, and also if your vents and air ducts are leaky.
  1. Start at the top. If you want to go farther in sealing your house up against the cold, it is time to work on the insulation. When installing new insulation, remember that heat rises, so you get the most bang for your buck by starting at the top. If you only have the budget or time to insulate one space, make it the attic. You can work down from there.

These areas should be your top three priorities on your mission to prevent heat loss in your Lilburn home. If you start here, you will get the best gains with the least effort. If you have any questions about how you can keep your home warm this year, give Triad Mechanical a call!

Tags: , , , , , ,
Posted in Energy Savings | Comments Off

Roswell Heating Repair Tip: Furnace Control Boards

Monday, February 6th, 2012

One way to be a truly responsible Roswell homeowner is to familiarize yourself with the major systems and appliances in your home. By having at least some understanding of how, say, your refrigerator or toilet work, you gain understanding of how to use them efficiently and detect when something goes wrong.

The same is true of your furnace, which can appear to be a complicated piece of machinery. In order to help you get acquainted with your furnace, we will discuss one of its main control components, the furnace control board.

As the name suggests, furnace control boards are responsible for governing the operation of the furnace. At a minimum, a simple furnace control will control the furnace ignitor (e.g., a spark generator or glow coil), the gas valve and the furnace thermocouple, also called a flame sensor.

More complex furnace control boards will also have control over the blowers and/or the built-in diagnostic system.

To simplify things, you can think of the furnace control board as being a driver and the furnace as its car. Just as the driver oversees all the functions and operation of the car from ignition to shutting off the engine, likewise does the control board for the furnace.

A typical operation sequence for a furnace control board goes something like this:

  1.  The control board receives a signal from the thermostat that the temperature is too low.
  2. It starts the ignition system, whether that be a spark generator, glow coil or pilot light.
  3. Once the ignitor is hot, the furnace control board initiates the flow of gas through the burners, where it is ignited.
  4. The control board keeps the furnace running until it is signaled by the thermostat that the temperature is now high enough, or until it detects something is wrong.

(An example of a malfunction where the control board would get involved is a thermocouple that is not detecting enough heat. In this case, the control board would shut off the gas flow to prevent a leak into the home.)

Furnace control boards are an essential part of your Roswell home’s HVAC system. And now, as a responsible homeowner, you know just how important. If you suspect a problem with your furnace control board, give Triad Mechanical a call!

Tags: , , , , ,
Posted in Heating | Comments Off

Is Your Furnace Making too Much Noise? A Tip from Dunwoody

Wednesday, November 16th, 2011

The old saying that “It is better to be seen than heard” certainly applies to the mechanical equipment in your Dunwoody home. If you hear a squeaky noise or loud clattering you automatically suspect that something is wrong. And if that noise is coming from your furnace, you better pay attention to it. A noise is an obvious sign of a problem – minor or major – and it could result in mechanical failure that could leave your home cold and uncomfortable – and affect your home’s indoor air quality.

Today’s newer variable-speed furnaces keep a constant airflow through the ventilation system utilizing a low speed fan that consumes small amounts of electricity. Constant airflow brings in fresh air and keeps the room air from becoming stale or stagnant. Because of this constant operation, it is important to ensure the furnace is running at peak efficiency, which also means that it is running quietly.

Here are some common noises, possible reasons, and suggested repairs. As always, if you are in doubt about how to repair your furnace, call a local qualified heating contractor and schedule a service call.

  • Squealing noise – could be a worn out or slipping blower belt. Check for proper tension of the belt or replace the belt if it is worn out or cracked.
  • Squealing noise – could be worn out motor shaft bearings. Lubricate the blower motor at the proper points.
  • Rumbling noise – often caused by a poorly adjusted pilot light when the burners are turned off. Adjust the pilot as necessary.
  • Rumbling noise – often caused by dirty gas burners when the burners are switched on. This problem requires service from a qualified heating technician.
  • Buzzing noise – often caused when a blower motor mounting come loose. Tighten the mounting screws or use shims to fill gaps.
  • Hissing noise – indicates a possible air leak. This problem requires service from a qualified heating technician.
  • Ticking noise – possibly a leaky gas valve. This problem requires service from a qualified heating technician.
  • Rattling noise – could be a dirty fan blade. Wipe the fan blade or clean with degreaser.
  • Rattling, grinding, or whining – could be resistance to airflow that causes the motor to work harder. Check the vents in each room for dirt, debris, or obstructions and clear them.
  • Vibrating noise – may not be the furnace but loose or cracked seams in the ventilation system. Check the ductwork seams and hangers to ensure everything is tight. You may need duct tape or bracket hardware.

The best way to keep your furnace and ventilation system from making noises is to practice preventative maintenance. Have your furnace checked annually by a qualified heating contractor – and enjoy the peace and quiet.

Tags: , , , , , , , , ,
Posted in Heating | Comments Off

How to Replace a Thermostat: A Guide from Roswell

Wednesday, October 26th, 2011

There are a lot of common household tasks that do-it-yourselfers can handle beyond changing light bulbs or replacing a fuse. One of those is changing out your Roswell home’s thermostat. The reasons for replacing a thermostat can vary from making an upgrade to changing out a thermostat that is not working right – or at all. Whatever the reason, the task is pretty simple and require s very little time and very few tools.

Let’s set the stage.

The materials you will need are the replacement thermostat, wire connectors, electrical tape (optional), needle nose pliers, and a screwdriver.

Here are the steps:

  1. Turn off electrical power to the existing thermostat. You can do this by flipping a breaker switch or removing a fuse from your home’s electrical panel. This would be a good time to make a note of the circuit’s location, writing the circuit number on the panel door or using a sticker.
  2. Remove the cover from the existing unit. You should be able to locate the screws that hold it to the wall mounting plate. Remove the screws and pull the unit away from the wall and mounting plate. Be careful not to touch the electrical wires together on the thermostat.
  3. Disconnect the wiring. Carefully remove the electrical wiring from the unit and keep the wires apart. You might want to tape the bare ends and also ensure that the wires don’t fall back through the wall. If the wires are not color coded, mark each one and which terminal they were removed from. Remove the mounting plate.
  4. If you are using a new mounting plate, make sure it fits over the existing hole and then pull the wires through the opening of the plate. Make sure the mounting plate is secured to the wall with the proper screws.
  5. Now match the wires to the terminals on the new thermostat. The wires are usually color-coded but if not, make sure you attach the right wires to the corresponding numbered terminals on the next thermostat. A green wire, which operates the furnace fan blower, is connected to the “G” terminal. The white wire operates the heater and attaches to the “W” terminal. The yellow wire operates the air conditioner and connects to the “Y” terminal. Use a wire nut to secure the wires and keep them apart from other wires. Ignore any other wires coming out of the wall as they are not necessary and may have been added by the original builder for other purposes.
  6. Carefully move the wires back into the wall as you line up the new thermostat on the mounting bracket. Install the new bracket and secure the thermostat to the bracket.
  7. Turn your power back on and check your thermostat by setting the temperature high or low, to engage the furnace or air conditioner.

This simple procedure can be done in less than 10 minutes. But if you have any doubts and want greater peace of mind, call a professional heating and cooling contractor to perform the installation.

Tags: , , , , ,
Posted in Heating | Comments Off

How Heating Zone Control Can Save You Money in Roswell

Monday, October 17th, 2011

The costs of heating your Roswell home have risen dramatically over the past couple of decades, thanks to higher energy costs and price increases for heating equipment. Despite the strides made in energy efficiency, there seems to be no end in sight for the steady rise in heating equipment operating costs.

Now add in the cost of heating unoccupied areas of your home, such as basements, hallways, or extra bedrooms, and the energy costs go even higher. Most of these costs are unnecessary and avoidable if you have the time and a small investment in a well-planned heating “strategy” for your home. This strategy involves using heating zone controls to make the most efficient use of your heating system.

In a nutshell, here is how heating zone control works. The rooms in your home are connected to your heating system by a series of ductwork, which carries heated and conditioned area to all corners. But some of these areas may not need to be heated as much – or possibly at all – compared to other rooms in your home. For example, do you need heat in your kitchen but not in your basement? Most people would answer yes. Or they may say they need more heat in the kitchen and some, but not very much heat in the basement.

Or try this: do most people in your house spend more time in one room, such as the family room, and less time in their bedrooms? If so, why would it be necessary to heat the bedrooms all of the time? In order to deliver heat to areas in your home that need it the most, the ductwork to these rooms should always be “open.” Ductwork to other unused areas of your home can be “closed” during various times of the day.

Opening and closing of ductwork and airflow is achieved by zone controls. A zone control is installed in the home which electronically or wirelessly opens and closes “dampers” in the ductwork, depending on the heating demand. You can divert heat to areas of your home using zone control and dampers while decreasing the heating load on your furnace. This type of heating zone control will move heated air to where you want it. Simply put, you are not heating areas of your home that don’t need the heat.

The heating zone controls can be programmed for various times of the day, too. For example, you may not need any heat in your basement while you sleep or when you are away from home. You can program the damper in your basement’s ductwork to remain closed or partially open during these times. In a sense, the heating zone control in your home acts like a programmable thermostat – only it uses a series of dampers to control indoor temperatures.

The next time you walk into an unused part of your home, think about how much money you are spending to heat it. It makes sense to consider heating zone controls. The initial costs of installing zone controls and dampers are minimal and the payback in energy savings and comfort are substantial.

Tags: , , , , ,
Posted in Heating | Comments Off

Get the Best Value From Your Contractor: A Guide From Buford

Monday, August 29th, 2011

When looking for the best value from a service provider in Buford, it is best to understand what value means to you. The dictionary defines value as “a fair return or equivalent in goods, services, or money for something exchanged.”

In the case of a mechanical contractor, customers are looking for value in the quality of the replacement or newly installed parts or equipment. For example, if your contractor gives you the choice of a product that is warranted for five years versus one that is warranted for ten years – and the price for the longer warranty is within reason, it may be more valuable to choose the product with the longer warranty. It may cost more initially but it is less likely to be serviced as much and will last longer.

Similarly, your contractor may offer a value proposition which includes a “good,” “better,” “best” scenario for the product you are shopping for. You may choose from any of the three based on the amount of time you plan to live in your home or the level of comfort or convenience that you are accustomed to. And, if you choose a “good” product over a “best” product, it may diminish the value of your house when it comes time to sell.

Any good contractor who gives you these choices is one who is giving you the best value.

When it comes to service, there are also value choices, too. For example, how important is it to you to work with a contractor who values your time? Today, time can be just as important as money and is certainly a value consideration. One contractor may only be able to give you a large window of time when his company will be able to serve you, say 8:00 a.m. to 3:00 p.m. Is it worth your time or someone else’s to wait? Another contractor may be able to give you a shorter window – as little as an hour – for you to wait. It may cost a little more but is it worth it to you? The answer is likely to be yes; and this adds a value to the contractor who respects your time.

Another value consideration when choosing a contractor is the “guarantee proposition.” That is, does your contractor have a service or maintenance plan that will keep your equipment in maximum working order based on regularly scheduled maintenance and inspections? Or would you rather hire a contractor to make the original installation or replacement and “hope” there are no breakdowns or expensive repairs during the time you own your home? There is definite value in a contractor who believes that “face time” is a valuable commodity and would be happy to see you on a regular basis to maintain your equipment and keep you up-to-date on any changes that might affect your equipment.

The true value of a contractor lies in the equipment he sells, the service he provides, and the peace-of-mind and time savings you get in return.

Tags: , , , ,
Posted in Air Conditioning | Comments Off

What Is a Whole House Pressurization Test and Should I Get One?

Wednesday, July 6th, 2011

If you have a forced air heating or cooling system in your home, you also have a system of ducts through which that heated or cooled air circulates. And most people don’t give a second though to those ducts. After all, if your heating and cooling systems are working, the ducts must be doing their job, right?

Unfortunately, that’s not always the case. If ducts are not working properly, the whole system will be in trouble, even when you don’t realize there is a problem. That’s why a pressurization test is so important – it provides peace of mind knowing that your home’s ductwork is not only properly installed, but that it doesn’t need any special repairs.

Why Pressure Matters

Your duct system depends on proper pressurization to evenly and efficiently distribute air throughout your home. Leaks, cracks or clogs in the system can disrupt that pressure and lead to uneven or inadequate movement of air through your ducts. This causes problems you may not notice, so if you haven’t had your ducts checked for proper pressure in a while, it’s worth looking into.

Improper pressurization causes symptoms like hot or cold spots in your home or an overall drop in the effectiveness of your home heating and cooling system. When loss of pressure is due to a leak that lets in unfiltered air from outdoors it can also lead to a decrease in indoor air quality. Often these symptoms are easy to ignore. But by doing so, you only allow the situation to get worse.

A whole house pressurization test is the best way to determine the state of your home duct system. By using high tech diagnostic equipment, home HVAC professionals check over your entire system to determine whether you have a pressurization problem. If so they can then quickly pinpoint the source. Once that’s done, the repairs are usually quite simple and you’ll get much more out of your home heating and cooling system than you did before.

Even if no symptoms of improper pressurization in your ducts have presented themselves, it’s worth having one of these tests performed. Especially if you don’t know when the system was last checked, a whole house pressurization test can help uncover small problems before they turn into bigger ones. And the peace of mind this provides is well worth the day it takes to perform the test.

Tags: , , ,
Posted in Indoor Air Quality | Comments Off

What Are the Benefits of Having a Ceiling Fan?

Wednesday, May 18th, 2011

There are definitely some days every year that would be pretty miserable to get through without the benefit of a central air conditioning system in your home. And since you have a central air conditioning system in place, it may seem silly and unnecessary to think about having ceiling fans put in as well. There are actually quite a few benefits of having ceiling fans, however, regardless of what kind of central air conditioning system you have or how powerful it is.

Ceiling fans are not too expensive to put in and they take very little energy to run. But the breeze they produce can have a powerful cooling effect on a room. In fact, running a ceiling fan can make you feel up to eight degrees cooler than you would otherwise.

While this certainly is not enough on a really hot day, it can actually be plenty when the weather is not all that hot. But even if you have your central air conditioning turned on, you can still benefit from running your ceiling fan. That is because the cooling effect of the ceiling fan can allow you to turn up the thermostat for your air conditioner, resulting in a considerable savings on your cooling bill.

Because ceiling fans are so cheap to run, they can complement central air conditioning systems nicely and will provide significant savings over time. Running an air conditioning system alone can certainly keep you cool and comfortable all summer long, but it will also cost you considerably more than if you were to throw a ceiling fan into the mix as well.

And that is not all a ceiling fan can do to help you stay comfortable all year long. In fact, ceiling fans can also be of use in the winter because they help to return the warmer air to the lower parts of your rooms. Warmer air will naturally rise, meaning that your heating system will have to work harder and harder to keep the air in the lower part of your room warm. But with a ceiling fan in place, that warmer air will be re-circulated throughout the house to keep you warmer and help keep your energy bills down at the same time.

Tags:
Posted in Air Conditioning | Comments Off

Save Money with Coupons – HVAC and Plumbing

Saturday, April 23rd, 2011

HVAC and plumbing services are not things that you usually think about using coupons for. After all, you almost never call an HVAC specialist or plumber unless there is an emergency, and that means you probably do not have time to go hunting for a coupon. You are going to go with the person who is able to respond quickly and get the job done fast.

But that does not mean you should have to pay too much for emergency or other HVAC and plumbing services. In fact, if you know where to look, you can find coupons for great deals on anything from annual maintenance to full new system installation. Of course, not all of these deals are that great. But even saving a little on each service will add up over time. Plus, gathering up some coupons ahead of time will make it easier for you to choose a good HVAC service or plumber because you can see which one in your area offers the best deals.

So where do you find these great coupons? Well, a lot of them can actually be tracked down online. A simple search for HVAC or plumbing coupons in your area should turn up quite a few results for services you could use now or in the future. Some of these offer quite substantial savings as well, so even if they are for something you do not need at the moment, take a look at the expiration date. Even if you are not sure you will be able to use the coupon in that space of time, there is certainly no harm in holding onto it just in case.

It is also important to remember that you do not need to stay with the same company that installed your system, for instance, if you can find a coupon for great savings on annual maintenance with someone else. Just about every company in this field is well versed in handling all types of HVAC or plumbing equipment and they can easily take care of a system that another company installed.

Particularly if you are not satisfied with the service that you get from the company you are now using, look around for coupons from someone else. That is a great way to figure out which new company is worth a try.

Tags:
Posted in Air Conditioning | Comments Off