Posts Tagged ‘Morgan County’

« Older Entries

Winder HVAC Tip: Heat Pump Refrigerant Problems

Wednesday, February 29th, 2012

Your Winder home’s heat pump is a very complicated piece of equipment that uses a number of moving parts to compress and circulate refrigerant and extract heat from one environment and place it in another. So, if your heat pump has refrigeration problems, it will almost certainly cause problems for the heating or cooling of your home.

Common Refrigerant Problems

There are a number of potential problems your heat pump might face, especially as it begins to age and components become worn. Some common issues include:

  • Compressor Issues – The compressor is a component in your heat pump that compresses the refrigerant gas into a liquid. This liquid is what circulates through the device and extracts heat from the outside air (or inside your home when in cooling mode). If the heat pump doesn’t turn on properly, isn’t producing enough heat or is using a large amount of electricity suddenly, it may be a compressor problem.
  • Refrigerant Leaks – Your heat pump doesn’t consume any refrigerant during operation. So, if it starts to leak refrigerant, there is likely another problem and it should be repaired immediately (for health and environmental reasons). Common signs of a leak include suddenly higher electrical bills, inefficient heating and possibly even a faint odor near the device.
  • Freezing Up – If your heat pump freezes, you should check for any blocked air vents or registers, check the condensate line and check your filter for blockage. Most often, a freezing problem is directly related to something being clogged and is a relatively easy fix. The only way to know for sure is to call a professional to investigate, however.

A heat pump is a very complex piece of machinery with a number of moving parts that can all cause issues if not properly maintained. If your heat pump stops heating or cooling effectively and it is not a simple fix such as a filter or belt, you should call Triad Mechanical to inspect for more significant problems such as the compressor or refrigerant.

Tags: , , , ,
Posted in Heat Pumps | Comments Off

Atlanta HVAC Special: $189.00 in Bonus Bucks (with Value Care Club membership)

Wednesday, February 1st, 2012

Ask anyone in Atlanta what the best thing you can do to keep your HVAC system running smoothly, and they’ll answer: “yearly maintenance”. An annual tune-up doesn’t just check your system for problems; it also keeps it in top working order by lubricating moving parts, changing filters, tightening electrical connections, and much more. All of these vital tasks ensure that your heating system is working safely and at peak efficiency. Regular maintenance will give you peace of mind knowing that you have done everything you can to prevent breakdowns and extend the life of your system. If you sign up for our Value Care Club, we will make sure that your system gets the care it needs. And as an added bonus, we are also offering $189.00 in Bonus Bucks! * These bucks can be used towards some upgrades to your system; great equipment can make a big difference in how much you are saving on your monthly heating bills!

To learn more about our Value Care Club or Bonus Bucks, please give us a call today!

*towards specified upgrades

Tags: , , , ,
Posted in Heating | Comments Off

Water-Saving Tips and Tricks from a Marietta HVAC Contractor

Friday, January 6th, 2012

We are going to take a break from heating information to give you  some of our favorite water-saving tips. They are easy to incorporate into your lifestyle – and can save you hundreds or even thousands of gallons of water a year.

Whole House

  • Check for leaks – you may save thousands of gallons a month! You can find leaks by looking, listening, and monitoring your water bill for unusually high usage. To check for toilet leaks, put food coloring in your tank. If it gets into the bowl without flushing, you have a leak. Don’t forget to look for leaks in your outdoor plumbing too.
  • Know where your master water shut-off valve is located. In the event of a major problem, you’ll save thousands of gallons of water – and maybe your possessions as well.

Outdoors

  • Adjust your sprinklers so that you water only your lawn – not your sidewalk or driveway.
  • Consider adding a patio or “outdoor room” to your home. You’ll have less lawn to water and will add thousands of dollars to your home’s value.
  • Do two chores at once – water the grass by washing your car or your pet on the lawn. Be sure to use natural, biodegradable soaps.
  • Have your plumber re-route your laundry waste water to your lawn (check with local authorities first to be sure this is legal in your town).

In the Bathroom

  • Turn off faucets when you’re not actively using water – such as when you’re lathering your hands, shaving, or brushing your teeth. You’ll save hundreds of gallons each month. New touchless water faucets (or very affordable converters for your existing faucet) make this easy and fun to do, especially for kids.
  • Shorten your shower by only a minute or two, and save 150 gallons of water a month. (You can do this by turning off the shower while you lather your hair.)
  • Replace your old showerhead with a new WaterSense water-saving showerhead. They’re inexpensive and easy to install. You’ll save up to 750 gallons a month (and it’s a great opportunity to get a nice style upgrade too!).
  • Install WaterSense-certified aerators on all your faucets – another inexpensive upgrade that can save hundreds of gallons a month.
  • Insulate hot water pipes so don’t have to run the water as long while you wait for it to heat up.
  • Plug the tub before turning the water on for your bath, then adjust the temperature as the tub fills up.
  • Keep a bucket in the shower to catch water as it heats up. Use this water to flush toilets or water plants.

In the Kitchen and Laundry Room

  • Install a tankless water heater near your kitchen sink so you don’t have to run the water while it warms up.
  • If your dishwasher is new, scrape off excess food, but don’t pre-rinse. Modern dishwashers are built to handle un-rinsed items.
  • Upgrade your old water-cooled refrigerator, air conditioner, or ice-maker to a new air-cooled model for a significant reduction in water use
  • When buying new appliances, look for the EnergyStar label, which guarantees high efficiency. Also, look for models that offer cycle and load size adjustments.
  • Run your dishwasher and clothes washer only when they are full – you can save up to 1,000 gallons a month.

Tags: , , , , , ,
Posted in Energy Savings | Comments Off

A Question from Stone Mountain: What Is a Cast Iron Radiator?

Monday, December 19th, 2011

Cast iron radiators are part of a type of home heating system that has been around for generations. While these types of systems have been largely displaced by newer forced air heating in Stone Mountain, they do still hold some distinct advantages over their more modern counterparts.

Cast iron radiators are heated as either hot water or steam is circulated through them from a furnace or boiler. As the cast iron heats up, it radiates the heat outward into the air and can thoroughly heat your home evenly and efficiently.

In fact, heating systems that use cast iron radiators are quite a bit more efficient at heating homes. They also don’t typically have the types of problems associated with certain types of forced air heating like hot spots, cold spots or generally uneven heat distribution throughout the house.

Cast iron radiator heating systems are also typically cheaper to install than forced air systems because they don’t require ductwork. Instead, a closed system of pipes links the radiators to the boiler, and those are much easier to put in place and generally take up much less space than ductwork does.

While radiators can also be made out of some other metals, nothing holds the heat as well as cast iron radiators do. It is also safer to heat cast iron to higher temperatures, so you don’t have to worry about keeping them on too long or running them in extreme circumstances. They also hold the heat extremely well, so they can continue to heat a room even after the heat has been shut off.

Of course, cast iron radiators are not a solution for keeping your home cool in the winter as some of the newer heat pumps and other central forced air heating and cooling systems are. If you have cast iron radiators in place, you’ll still have to invest in some type of air conditioning system if you want to keep your home cool enough in the summer.

Also, because they do get very hot, cast iron radiators can present a potential burn hazard, particularly to small children.

Tags: , , , , , ,
Posted in Heating | Comments Off

How Do You Clean the Parts of a Heat Pump? A Question from Conyers

Friday, December 2nd, 2011

It is very important to keep your Conyers home’s heat pump clean. It improves efficiency, helps performance and prevents malfunctions. Cleaning your heat pump should be part of your home maintenance routine in order to keep the house as comfortable and worry-free as possible.

That is all well and good, but how do you go about cleaning the components of your heat pump. It’s one thing to advise you to clean, clean, clean…but it doesn’t do much good if you do not know how. To correct that, here are some tips to help you clean the different parts of your heat pump.

Caution: before doing any maintenance on your heat pump, including cleaning, be sure to turn off the power to the unit. This is a necessary safety measure.

Filters

  • If you use disposal air filters in your heat pump, skip this part. Just make sure to change them regularly, in accordance with the manufacturer’s instructions.
  • To clean air filters, follow the directions of the manufacturer that were included with the filter. This is also a good time to double check that the filters are installed properly.
  • Clean or replace your filters monthly during heavy use seasons, such as the warm summer months and cold months of late fall and winter.

Coils

  • Remove any debris from the outside of the coils and the surrounding area. Sticks and leaves may have accumulated near the outdoor coils, so just brush them away.
  • Using a soft brush attachment, vacuum the exterior of the coils. Take care not to bend or dent the coils.
  • Using a hose with a spray attachment, flush the coils with water from the inside out. This will remove any stubborn debris. Take care not to spray any electrical components, such as the fan or any nearby wires.
  • While you are inside the unit, vacuum the bottom inside to get rid of any more stray debris.

With that done, put everything back, replace the grille covers and power the heat pump back on. It should run smoothly with a fresh filter and no debris to gum up the works. Clean the coils every few months to keep the heat pump in tip top shape.

Tags: , , , , ,
Posted in Heat Pumps | Comments Off

Easy Ways to Lower Your Heat Pump’s Energy Bill in Atlanta

Wednesday, November 30th, 2011

One of the biggest advantages of having a heat pump in your Atlanta home is that it is highly efficient for both heating and cooling. There is always room for improvement, though, so here some tips to lower your energy bill even more:

  • Get it checked. It’s been said many times before, but it’s always worth saying again: consistent maintenance is one of the biggest keys to keeping any appliance running efficiently. Get your heat pump inspected by a professional at least once a year. This will keep it in good shape and provide an opportunity to make small repairs, before they have a chance to turn into big problems.
  • Keep it clean. When it comes to HVAC equipment, a clean unit is an efficient unit. Check and replace the filters regularly, according to the manufacturer’s instructions. Keep the coils and fan clean. This will also be part of the annual maintenance, but you can – and should — do touch up cleaning on your own.
  • Install a thermostat. A programmable thermostat is a great energy efficiency tool for any home heating and cooling system, not just a heat pump. A thermostat will keep the temperatures lower during the day or any time no one is home, so that you are not wasting heat.
  • Let it run. It may seem counterintuitive, but turning off a heat pump to save energy may actually do more harm than good. Heat pumps operate most efficiently when they stay running on a regular basis. The components don’t need to take time to spin up, and the refrigerant stays warm so it can keep moving. Your best bet is to have your heat pump connected to a programmable thermostat, program it and then stop thinking about it. You’ll save a bundle over manual operation.
  • Protect the outdoor unit. The outdoor portion of your heat pump has to put up with a lot from the elements. Strong winds can damage them or negatively impact the efficient operation of the pump, so keep the outdoor unit protected from wind.

These simple measures, in combination with a highly efficient heat pump, will help slash your energy bills. In addition, check to see if your heat pump is eligible for a federal tax credit, which can save you even more money.

Tags: , , , , ,
Posted in Heat Pumps | Comments Off

Five Important HVAC Maintenance Tasks: A Guide from Conyers

Friday, November 11th, 2011

Do you have a “mental checklist” of chores that need to be done a regular basis around your Conyers home, such as cleaning the window treatments, washing windows, shampooing rugs, etc.? There are various areas of your home that need regular maintenance and cleaning – and that list includes your heating and cooling (HVAC) equipment. Do you know a poorly operating furnace can cost you in increased energy usage and higher utility bills? That same poorly operating furnace can be discharging harmful carbon monoxide gas into your home, creating a health risk.

So, it is important to keep your furnace in peak operating condition and the best way to do that is by making a checklist of HVAC maintenance tasks. Let’s look at five of them.

  1. Check your filters. Routine replacement of your furnace filters should be every 1-3 months, depending on the indoor air quality of your home, number of occupants, size, etc. You can purchase disposable filters online, at a local “big box’ retailer, or from your local HVAC contractor. A visual inspection of your filter is the best way to determine if it needs replacing. If you have a removable electronic filter, it should be cleaned every few months using soapy water and a hose. Any restrictions to air flow through the filters can lead to poor indoor air quality and will cause your furnace to work even harder to circulate warm air through your duct system.
  2. Clean and insect the blower assembly and motor. You can do this with a vacuum. Also check the fan belt to make sure it is not too loose or if it has any cracks or splits.
  3. Look for any obstructions in vents and returns. Believe it or not, your furnace needs “help” to operate. Any build-up of dirt or debris around the grilles of your ventilation system will just make your furnace work a lot harder. Do a visual check inside and outside and pay special attention to flues and chimneys, where indoor air is exhausted. Any blockage can result in an accumulation of poisonous carbon monoxide gas.
  4. Keep the area clean and clear around your furnace and water heater. Never store flammable liquids near your heating equipment. Your furnace room is not a storage closet.
  5. Revisit your home’s insulation. When was the last time you checked out the insulation in your attic or crawlspace? Is it securely in place or drooping down? Are there bald spots where the insulation has deteriorated? Is the insulation sufficient or should it be upgrade?

Tips 1 and 2 relate directly to furnace maintenance but tips 3 to 5 are equally important, having a direct bearing on how your furnace performs and its ultimate efficiency. If you follow all five tips and have an annual inspection from a qualified HVAC contractor, you should enjoy a fall season of comfort, warmth, and safety.

Tags: , , , , , ,
Posted in Heating | Comments Off

HVAC Safety the Whole Family Should Know: A Guide from Sugar Hill

Wednesday, November 2nd, 2011

If you think the most important thing your Sugar Hill home’s heating and cooling (HVAC) system can do is to provide indoor comfort, you are right. But there is another thing an HVAC system does that is very important and it affects your entire family. It provides a safe indoor environment, too.

Besides warmth in the winter, a finely-tuned HVAC system can clean and filter the air you breathe. That’s important to people who suffer from allergies and is especially important for minimizing the spread of germs that cause colds and the flu. The key phrase in this paragraph is finely-tuned. If your HVAC system is not working correctly – out of tune – it can cost you a great deal in monthly utility bills and can be harmful to your health.

It is important for you and your family members to understand the basics of HVAC system maintenance so you can all understand the symptoms of improper maintenance and its consequences. For example, if anyone in your home is suffering from flu-like symptoms or are constantly drowsy or listless, they may be suffering from the a silent killer: poisonous carbon monoxide gas. This gas is formed during incomplete combustion of fossil oils like natural or propane gas. A malfunctioning furnace can emit carbon monoxide gases and you may never even realize it, until it is too late. Long-term exposure to the gas can cause brain damage and/or chronic sleepiness. It some cases, it can even cause death.

You may be able to diagnose the problem, but you aren’t qualified to test and repair a furnace that is creating deadly carbon monoxide gas. Your best bet is to call a qualified HVAC contractor who can diagnose the furnace and offer repair or replacement suggestions. But there are things you can do to prevent the build-up of carbon monoxide gas.

Check all exhaust vents, like chimneys and flues for any blockages. A blocked or partially blocked vent can cause the build-up of carbon monoxide gas. And never, EVER, use a gas or propane powered heater in an unvented area of your home. These types of heaters create various levels of carbon monoxide gas that needs to be circulated out of each room and replaced with clean, fresh air. So, your family can actively ensure that there is no debris, bird’s nests, animals, leaves, or snow in the ventilation system.

You can also “help” your HVAC system by keeping vents clean by vacuuming dirty vent grilles and, in general, keeping the home clean. The cleaner the home, the easier it is for your furnace to do its job and the easier it will be for you and your family will breathe. These are a few easy maintenance tips will keep you and your family warm – and safe – this fall and winter.

Tags: , , , , ,
Posted in Heating | Comments Off

The Beauty of Zone Heating: A Guide from Winder

Friday, October 14th, 2011

While it might not technically be a necessity, there are a lot of reasons why you might want to look into having a zone heating system installed in your Winder home. Whether you’ve been using the same home heating system for a long time or are looking to have a new one installed, there’s never a bad time to have a zone heating system put in.

Most people think that the only thing that affects their home heating and cooling bills is the energy efficiency of their furnace or heat pump. However, that’s simply not always the case. Certainly, the more efficient your furnace or heat pump is, the lower your energy bills will be. But that doesn’t mean they’re as low as they could possibly be.

After all, if you don’t have a zone control system installed, you’re paying to heat your entire house every time you turn on the heat. Depending on the size of your house, that could mean you’re heating anywhere from two to 10 rooms or more that are unoccupied at the time. In fact, you could be paying to heat an entire empty wing of your home. And while you’ll pay less than you would if your heating system was less efficient, you’re still paying more than you need to.

With a zone control system, you can heat your home much more efficiently because you can control which areas of the house get the heat and which ones don’t. You can set multiple different temperatures for the different zones of your home, which allows you to keep the occupied areas warm while not forcing you to waste energy to heat unoccupied spaces.

Aside from the economic benefits of only heating the areas of your home that you need, zone control systems also can put an end to some of those contentious thermostat wars that go on in so many households. If the members of your household can never agree on what a comfortable temperature is, they can simply each set their own temperature for their own area of the house.

That way, everyone is happy and no one has to suffer uncomfortably. After all, you paid a lot for your state of the art home heating system. It’s only fitting that you should be able to get the most possible out of it.

Tags: , , , , , ,
Posted in Energy Savings | Comments Off

How to Check if Your HVAC System is the Right Size: A Tip From Watkinsville

Wednesday, October 5th, 2011

Do you ever feel that your Watkinsville home just doesn’t get cool enough during the warm months or warm enough during the cold months? You have tried to adjust your thermostat to the right comfort level but it just never seems right. And on top of that, you notice that your utility bills keep going up and up. Even when you dial up the thermostat in the summer and dial it down in the winter to saving on energy usage, your bills are still about the same.

You could try adding fans and shedding clothes during the warm months or wearing sweaters and crawling under a pile of blankets in the cold months. But do you really enjoy living that way? There must be another solution as to why your heating and cooling (HVAC) system is just not keeping you comfortable – and affordable.

That air conditioning condensing unit sitting in your backyard or the furnace in your basement should be your friends. But in many cases, they are not. That’s because whoever installed those HVAC system components didn’t do their homework on your home. The components were sized incorrectly. If a furnace or air conditioner is sized incorrectly, it usually cannot keep up with the demand for heat or cold and often puts such a burden on the equipment. As a result, regular failures and repair bills are commonplace.

And it may not be the fault of the installing HVAC contractor. Over the years your home may have undergone renovations including additions and new windows, which have increased the square footage or demand for more heating or cooling. Those renovations may not have included upgrades to your home’s HVAC system.

So how do you check for the right size? These checks are done including a load calculation, which adds in the size of your home’s living space, number of door and windows where heat loss or gain could occur, and a check of heat loss or gain through leakage in cracks, roofs, crawlspaces, etc. This will determine what size of furnace or air conditioner is needed to meet the heating or cooling needs of your home and its own individual characteristics.

All of these factors are considered when determining the equipment size. In air conditioning jargon, you will hear about tonnage of cooling capacity. An example may be a 2.5 ton air conditioning unit for a 2,000 square foot home. In furnace jargon, you will learn about Btu ratings, which are British thermal units. Most furnaces are sized in 20-25,000 Btu increments. Each is matched to the cooling or heating needs of your home. Your HVAC contractor will likely recommend using a programmable thermostat, too. That way, you can set the temperature of one or more zones in your home to when each zone is occupied.

Tags: , , , ,
Posted in Energy Savings | Comments Off

« Older Entries