Posts Tagged ‘Little Five Points’

« Older Entries

Atlanta AC Repair Question: Why Is My Air Conditioner Not Cooling?

Monday, April 30th, 2012

Designed for one to two decades of life, air conditioners are able to run virtually trouble free with just a little maintenance annually.  If these little things like changing the air filter and cleaning the drain are not done regularly, the neglected units can really lose their ability to cool effectively.

The Basic Course

Through a process which involves the rapid evaporation and condensation of chemicals called refrigerants, air conditioners use compounds that have properties that allow them to change rapidly from gas to liquid and back again at low temperatures.

Heat is absorbed when the liquid evaporates and transforms into gas, making the space around it cooler.  Compressing it tightly together again, the heated gas condenses back into liquid with a residue of unwanted moisture that must be released and is vented usually to the outdoors.

The newly cooled air is distributed through the house by means of ductworks, pushed by fans driven by electric motors.  As the air moves along, it passes through a filter and can be further de-humidified.

Problems in the System

If the filter is clogged, movement of the cooled air is slowed to the point we might think the unit is broken.  If the condensate drain is plugged, the motor can get damaged and stop producing.  Regular maintenance performed by the home owner or as a service of  Triad Mechanical can avoid or eliminate these simple aggravations.

When the heat builds, however, and cool relief seems nowhere near the air ducts, it may be time to call an Atlanta HVAC professional to dig deeper to find the reason and suggest solutions.

Back to Cool

If not serviced regularly, the amount of refrigerant in the coils may decrease over time or the coils themselves could get clogged and impede the evaporation/condensation process.  A leak in the coils could drain the system, rendering the unit useless and wholly unproductive.

There are belts on each of the two separate fan motors which may be worn or loose, causing the fans to blow less efficiently.  The motor may need to be oiled or have a broken part that doesn’t allow it to push the air at all.

Most of the time, these fixes are relatively minor and do not threaten the life of the air conditioning unit.  Schedule an annual inspection and service from a certified Atlanta HVAC company like Triad Mechanical to take it off your list and stay cool.

Tags: , , , , , ,
Posted in Air Conditioning | Comments Off

Arcade Heat Pump Guide: The Defrost Cycle

Monday, January 9th, 2012

If your Arcade home has a heat pump, you’ll want to understand the defrost cycle to help you maintain your heat pump and troubleshoot repairs. While this is a basic guide, you should call a qualified HVAC technician if you experience major issues with your heat pump.

During the winter when a heat pump is heating your home, the cooler outdoor air that’s pumped in and heated may have excess moisture. The outdoor coil evaporates this moisture, but under certain weather conditions, frost can accumulate on the coil and decrease the overall efficiency of the heat pump.  To help reduce the potential for damage from the frost, heat pumps are manufactured with a defrost cycle to melt the frost from the outdoor coil. The defrost cycle occurs often during heavy frost conditions, so check weather reports if your defrost cycle seems to be running often.

At the beginning of the defrost cycle, the heat pump switches to the cooling mode and temporarily warms up the outdoor coil until it reaches somewhere around 60° F to melt the frost from the coil. To increase the temperature of the coil, the outdoor fan is prevented from turning on until the outdoor coil reaches the desired temperature. Weather conditions and the timing device both affect the amount of time it takes for the heat pump to move through the entire defrost cycle.

In older homes, electric heating elements are sometimes installed to prevent cool air from being distributed throughout the home. This element will turn on with the defrost cycle and shut down the blower fan inside the house. If you have an older heat pump, you may want to consider upgrading to a more efficient model.

Call Triad Mechanical any time if you have questions about the defrost cycle for the heat pump in your Arcade home.

Tags: , , , ,
Posted in Heat Pumps | Comments Off

Pros & Cons of Heat Pumps: Some Tips from Statham

Wednesday, November 23rd, 2011

When deciding on any major purchase for your Statham home, a critical step is to weigh the pros and cons. This helps you to decide on the best option and reach the best decision for your needs and preferences.

Installing a new heating system is a perfect example of a situation in which you would need to weigh pros and cons. There are a lot of options, and not all of them are right for all people. Take heat pumps, for example. They are great devices and serve many people extremely well as home heating solutions, but they are not without their drawbacks. Below are some of the pros and cons of heat pumps to help you decide whether a heat pump if the way to go for you.

Pros:

  1. Inclusive – A heat pump not only heats your home in the winter but also cools it in the summer, thanks to a reversing valve that changes the flow of the refrigerant. Having one appliance for both heating and cooling can be very convenient.
  2. Energy efficient – Heat pumps are extraordinarily efficient when it comes to energy use. Because they simply move and distribute heat, rather than producing any on their own, they use minimal electricity.
  3. Simple – Operating on the same basic principles as your refrigerator or an air conditioner, heat pumps are relatively simple. More importantly, they simplify your life by putting your heating and cooling solutions in one package and running on electricity, so you don’t need any other fuels on hand.
  4. Inexpensive to operate – In addition to being energy efficient – which lowers your monthly energy bills – many heat pumps are eligible for federal tax credit. You can save a bundle by using a heat pump.

Cons:

  1. May need supplementing in cold climates – In climates where winter temperatures stay below 30 degrees Fahrenheit for a while at a stretch, a heat pump will have trouble keeping up and need to be supplemented.
  2. Don’t work in power outage – Obviously, because they are powered by electricity, a heat pump won’t work in a power outage, unlike some other heating solutions that do not require electricity.

Although the pros clearly outweigh the cons here, the cons are important as well. Carefully consider all these factors and more while deciding whether a heat pump is the solution for you. And if you have any questions, talk to your Statham heating contractor.

Tags: , , , ,
Posted in Heat Pumps | Comments Off

How Do I Check a Gas Furnace Draft Pressure Switch? A Question from Buford

Wednesday, October 19th, 2011

There are many reasons why a furnace stops working and in many cases, a Buford homeowner can perform some simple diagnostics to pinpoint the problem. Finding the problem is one thing – fixing it is another. When in doubt, don’t try it yourself. Call a qualified professional.

But let’s look at one possible problem and solution you may be able to perform yourself – testing the draft pressure switch. The draft pressure switch on a gas furnace allows an electrical current to pass through to ignite the furnace. The pressure switch monitors the draft conditions and won’t allow the furnace’s gas valve to open unless draft is correct.

If the switch is malfunctioning, so too will (or will not) the furnace.

The best way to locate the switch is by consulting with your owner’s manual or by going online and simply typing in the words “gas furnace draft switch.” It is identifiable by its round size and is bolted to the outside of the furnace. It should be nearby the draft inducer motor because the two are connected by a metal tube. The tube may sometimes be the culprit, too. A tube that is blocked with condensation may cause the switch to go bad.

To check for proper function, first turn off power to the furnace, either by shutting down the “on’ switch at the furnace or shutting off the circuit breaker.

Use a volt ohm meter to check if the switch is opening and closing properly. Start by zeroing out the meter’s probes by touching the tips together. Using the dial (could be analog or digital), set the meter to 24 volts. Ground the black probe by attaching it to any metal part of the furnace. Then place the end of the red probe on the metal tube connecting the draft pressure switch to the draft inducer motor.

If the switch is working properly the meter should read at least 24 volts, or very near that. If the reading is short of 24 volts, the switch is not working correctly. At that point you may decide to replace it or call a professional to do the task (recommended).

Always remember that there are many sources which will help you diagnose and repair a problem, especially those available through the Internet. If you search YouTube.com you will find many videos advising you on how to repair certain components. Use all of the resources available to you and keep the phone number of a qualified and professional heating and cooling contractor nearby.

Tags: , , , , ,
Posted in Heating | Comments Off

How Animal Dander Affects Indoor Air Quality: Some Pointers From Nicholson

Friday, September 2nd, 2011

One of the single most common indoor air quality pollutants in Nicholson is animal dander. The flakes of dead skin, fur or feathers produced by pets and outdoor creatures can be an allergy nightmare for millions of people. Even those without allergies tend to be less comfortable in spaces that have animal dander issues. Here are some things you should know about animal dander and allergies.

What’s the Issue?

Dead skin from dogs and cats is the biggest problem, with 27% of US homes having cats and 32% having dogs. Cats are a much larger allergen producer however. The number of allergy related complaints among cat owners is twice as high as that of dog owners according to the American Lung Association. Male cats are slightly worse than female cats as well. Don’t forget either that fur is not the primary source of dander. Dead skin, dried saliva and even specs of dried feces can contribute to indoor air quality issues. So, short haired cats or dogs are not any better for your home.

Another thing to consider is that pet dander is suspended in the air much longer than any other allergen because of how light it is. We’re talking about days of suspension, after which it settles into carpets, furniture, clothing and anything else with enough surface area to attract the dander.

Health Problems from Dander

For those allergic to animals, pet dander is an instant irritant. Just walking into a home in which a cat or dog is present can have an instant negative effect – including anything from coughing and wheezing to a runny nose or chest constriction.

Unfortunately, the easiest way to remove pet dander is to remove the pet and for severely allergic people, this is usually the only option. For others, however, there are some things you can do. You can remove the allergens themselves with high powered indoor air cleaning or filtration. You can also set aside areas in the house that the pet is not allowed into and take steps to make sure pet dander doesn’t get into the air supply for that room.

Tags: , , , ,
Posted in Indoor Air Quality | Comments Off

Finding an Ozone Friendly Air Conditioner: A Tip From Arcade

Monday, August 22nd, 2011

We’ve heard about ozone depletion in Arcade for almost 20 years as a major problem caused by a variety of chemicals we use almost every day. Propellants in aerosols, certain cleaning materials and the refrigerant in your air conditioning system are all culprits in the depletion of the ozone layer. So when you purchase a new AC unit, you want to be sure you won’t continue to contribute to the problem.

What Causes Ozone Depletion?

The number one contributor to ozone depletion is chloroflourocarbons, the man-made chemicals used in air conditioners since Thomas Midgley, Jr. invented the compound in the 1920s. When these chemicals reach the stratosphere, the ultraviolet light from the sun breaks the compound down to its base components, including chlorine atoms which subsequently break down thousands of molecules of ozone before dissipating.

The earliest CFCs used in air conditioners were incredibly damaging to the ozone. But since legislation was passed to stop the damage and new technologies were developed, there are less damaging alternatives.

Specifically, the refrigerant R410-A is considered environmentally friendly in that it doesn’t cause ozone depletion. Some air conditioners still ship with the older refrigerant R-22, however, which has been linked to ozone depletion and will no longer be allowed in new products after 2020.

Which Products Can You Buy?

When searching for a new air conditioner, look for a system that uses only R410-A. On average, these systems tend to cost more money, but keep in mind that in less than 10 years, refrigerants for older R-22 models will become much more sparse while R410-A will be an industry standard.

Of course, while R410-A doesn’t cause ozone depletion, it isn’t necessarily 100% environmentally friendly. It is still an HCFC and it contributes in smaller ways to global warming. To learn more about environmentally friendly air conditioning products, contact your local contractor.

Tags: , , , , ,
Posted in Air Conditioning | Comments Off

How to Judge the Quality of a Ceiling Fan: A Tip From Nicholson

Wednesday, August 10th, 2011

Like just about anything else on the market these days, there are good ceiling fans and there are low quality ones, even in Nicholson. With such a seemingly simple piece of equipment, it can be tempting to just grab the cheapest one you can find. After all, how much of a difference can it really make? In fact, the quality of the ceiling fan you buy can have a significant impact on its performance level and how long it lasts.

Of course, you do not necessarily want to go out and buy the most expensive thing you can find either. There are many good quality ceiling fans that will not cost you an arm and a leg, but you need to know how to find them and separate them from the rest of the pack.

One of the first things to look for when you are evaluating your ceiling fan options is how much of an angle the blades have. This angle usually ranges from eight to 15 degrees and the bigger the angle, the more air the fan can move at once.

However, cheaper fans with a less powerful motor cannot handle the resistance that a higher volume of air generates. What that usually means is that the units with the smaller blade angle are less powerful and will be less effective at circulating air throughout your room. Even when they are running at the same speeds, the blades with the smaller angle will move less air, and so they will not keep you as cool.

You should also check the various ceiling fans you are considering to make sure they are the right size to fit your room. To be safe, a ceiling fan’s blades should be no less than seven feet above the floor. But if you have very high ceilings, you may want to add something that can extend the fan down closer to the floor so that you will still feel all of the cooling effects it produces.

The various ceiling fans on the market right now all have many different features that can influence your decision as well. For instance, you may want to opt for a fan that has programmable settings or that comes with a remote control for more convenient access. But if these are not features you care about, you can probably save quite a bit by going with a no-frills model.

If you have more questions about how to keep your house cool this summer, contact your local air conditioning professional.

Tags: , , , ,
Posted in Air Conditioning | Comments Off

Tips from Buford for Controlling Rainwater

Friday, August 5th, 2011

Rain is a necessary evil almost everywhere, including Buford. It waters our lawns, replenishes the ground, stops dust from kicking up and wreaking havoc in our sinuses, and sometimes it’s even enjoyable to experience. Too much rain, however, can lead to all sorts of problems for homeowners. Hassles like flooding, leaks, water damage, and pests can be especially bad for people who live in particularly rainy areas. To make your life a bit easier, keep rainwater under control with some preventive measures.

Around The House

Rainwater clearly belongs outside, and if it gets inside, it can cause problems. Logically then, the first way to keep rainwater under control is to ensure structural integrity and proper drainage. Start on the roof by looking for any loose, damaged, or missing shingles. Replace these and patch any other spots that look troublesome. Repair all leaks promptly, no matter how small they are at first. Even a small leak can become a big problem in a storm, and can also lead to termite infestation. If you find extensive damage to the shingles – say, more than 20% – consider having the house re-roofed.

Next, clean out your gutters. This should be part of your routine spring maintenance list, as leaves and ice will have built up over the last several months. While you are up there, make note of any damage to the gutters and make repairs as necessary. Make sure your downspouts are clear of obstructions, flowing freely, and draining water away from the foundation. These steps are key to proper drainage of rainwater.

In The Yard

After taking care of the house, the next step is to head out into the yard. Take a walk through your yard and look for any areas where the grade is going back toward your house, as well as any depressions where water could pool. Essentially, you want to make sure that any excess rainwater in your yard will be effectively drained away from your house, in order to prevent flooding, water damage, and pest problems. Consider filling, grading, or installing a culvert or other drainage system to correct problems in the yard.

While you are at it, take a look at the driveway, too. Make a note of any cracks or holes that may need to be filled in, as these can also result in improper drainage. If you have a gravel driveway, consider having it graded if it hasn’t been done in a while.

Taking control of rainwater is all about keeping it out and away. These maintenance tips can help you do that. If you want more information about how rainwater can affect your HVAC system, call your local HVAC professional.

Tags: , , , ,
Posted in Home Maintenance | Comments Off

Pest Control

Monday, July 18th, 2011

Pests are a virtual inevitability in every home at some point, so it is important for every homeowner to know how to deal with that unwelcome stranger when it comes poking around.

Insects Be Gone

From ants to roaches, insects love to make themselves right at home. They invade in search of food, water, and habitable space, and they don’t care whether they are wanted or not. Here are some helpful hints to get rid of these multi-legged tenants.

Borax works just as well as a pest poison as more expensive commercial products. For roaches, sprinkle a bit in your cabinets. Make sure to take extra care that your dishes are free from the residue. Avoid areas where the borax could affect children or pets. Likewise, make a homemade ant trap by mixing equal parts sugar and borax in a jar with holes punched in the lid.

Ants are also repelled by the calcium carbonate found in common chalk. Draw a chalk line around any visible ant holes to keep them trapped inside. Keep termites away by keeping your yard free of wood debris and standing water. Fix any leaks immediately and clear out any thick growth close to the house.

Furrier Pests

Insects are not the only pests to be concerned with, as sometimes intruders come in a larger, furrier form. Mice and other small rodents are fairly common inhabitants, as well as the occasional garbage-scavenging raccoon.

The best way to keep animals from invading your home is to keep potential entry holes sealed. For a temporary fix, try stuffing small holes with steel wool and covering larger ones with wire mesh. Eventually, however, you should have all holes permanently filled by an exterminator or a contractor who is familiar with the strategies needed to stop these unwanted invaders.

In general, it’s best to avoid poisons that put your family or pets at risk. Not only do poisons create a dangerous environment, they often result in dead pests in your walls or under your floorboards where they are hard to remove. Traps are always best so you know where the rodents are at all times.

If you have tried these tricks to no avail, or you have a serious infestation problem, don’t be a hero. Call a professional and have the whole home treated so you can rest easy.

Tags: , , ,
Posted in Home Maintenance | Comments Off

Cleaning Air Conditioners

Monday, June 20th, 2011

One of the best things you can do to help maintain high indoor air quality in your home is to clean your air conditioning system on a regular basis. While these systems make it possible to endured a long, hot summer with minimal discomfort, they can also become a breeding ground for bacteria, mold and other indoor air contaminants that can make you sick or cause other types of problems.

Improving your indoor air quality isn’t the only reason you should worry about keeping your air conditioning system clean. A properly maintained air conditioner will function more efficiently for a longer period of time.

Air Filters

Changing or cleaning out your air filters regularly is one of the easiest and most important parts of air conditioner maintenance. These air filters are your number one line of defense against all manner of indoor air pollutants, but if they become saturated, they can no longer do their job. Fortunately, changing out these filters is a quick and easy job. Just mark the date on your calendar so you don’t forget.

Ducts

Without the system of air ducts that run through your home, your air conditioner wouldn’t be able to circulate all that cool air. But they’re also a very attractive place for dust, pollen, mold and other indoor air contaminants to collect. Unfortunately, the majority of your ductwork occupies space behind walls, beneath floors and in other equally inaccessible areas of your home.

For that reason, it’s generally necessary to have a professional with specialized equipment come out and clean your ducts once a year. By keeping up with maintenance, you can be sure that your air ducts aren’t harboring dangerous contaminants that your air conditioning system can then spread throughout your home.

Cooling Coils

The cooling coil is another part of your air conditioning system that needs to be cleaned on a regular basis. If your cooling coil is dirty, it won’t actually affect your indoor air quality, but it will impede your air conditioner’s ability to function effectively. The more sediment and debris allowed to build up on your air conditioner’s cooling coil, the less efficiently it will cool the air that passes over it. And if it can’t cool the air properly, your air conditioner will have to work overtime to maintain a comfortable temperature inside your home.

Tags: , , ,
Posted in Air Conditioning | Comments Off

« Older Entries