Posts Tagged ‘Lilburn’

Lilburn Heating Contractor Guide: Simple Steps to Prevent Heat Loss

Monday, February 13th, 2012

There are two fundamental ways to make your Lilburn house warmer. One is to generate heat, which is the job of your furnace or boiler. The second is to keep the warm air in — and thereby keep cold air out — which is the job of your system of insulation.

The idea that the physical structure of a home can be a component of the HVAC system is one that is often overlooked, but when you think about it, it makes sense. The insulation, windows, doors and building materials that comprise your home are designed to keep the place warm against the cold and vice versa.

So, when bolstering your HVAC system to promote efficient heating, it is important to also consider heat loss and how to prevent it. This is a process that can get out of hand if you go overboard, so it is important to prioritize. Let’s look at the top 3 places to start when trying to prevent heat loss.

  1. Doors and Windows:  If you have older doors and windows, they could be a source of heat loss in your house, even if they are always closed. Replacing your windows and door with Energy Star rated ones will make sure that you are not losing heat to the outside AND still getting all the heat energy from the sun. Installing storm windows or putting up heavy curtains in winter can also help cut down on your heat loss.
  1. Seal off drafts. If any opening to your house, such as windows and doors, is improperly sealed, improperly installed or if the surrounding construction is deteriorating, you can lose a lot of heat. Check any drafts that you notice that might indicate a problem, and also if your vents and air ducts are leaky.
  1. Start at the top. If you want to go farther in sealing your house up against the cold, it is time to work on the insulation. When installing new insulation, remember that heat rises, so you get the most bang for your buck by starting at the top. If you only have the budget or time to insulate one space, make it the attic. You can work down from there.

These areas should be your top three priorities on your mission to prevent heat loss in your Lilburn home. If you start here, you will get the best gains with the least effort. If you have any questions about how you can keep your home warm this year, give Triad Mechanical a call!

Tags: , , , , , ,
Posted in Energy Savings | Comments Off

Question from Druid Hills: What is a Gas Furnace Draft Hood?

Wednesday, December 14th, 2011

As every Druid Hills HVAC contractor knows, a draft hood is a necessary part of any gas burning appliance. For a gas furnace in particular it ensures steady air flow to the burners to avoid flares or the pilot light being put out by fluctuation in temperature and air flow.

What the Draft Hood Does

The draft will change in the chimney as exhaust vents towards it – especially when going from cold air to hot. A draft hood is placed above the upper most part of the gas furnace to draw air into the chimney and makes it possible to draw more or less air through the chimney as necessary to create a constant flow.

This makes it possible for the burner to enjoy consistent air flow without any wind gusts or sudden temperature spikes or drops. Hot air, if not put through a draft hood would create a strong air flow through the burners.

A draft hood cools the air as it is released by the burners from 500 degrees F to between 300 degrees F and 350 degrees F. The cooling needs to be carefully calibrated to avoid condensation build up in the chimney however – a problem that occurs when the temperature gets too low.

Maintaining Pressure

The draft hood is a part of a larger system designed to maintain air flow to the chimney. For every cubic foot of gas burned, the furnace needs to have 15 cubic feet of air for combustion and another 15 cubic feet of air for dilution. A draft hood and the rest of the ventilation system make it possible to put a furnace that has many thousands of BTUs in the basement of your home and still supply it with enough air to burn gas and dilute the exhaust before it enters the chimney.

For all of these reasons, if you see your pilot light flickering irregularly, notice a backflow of exhaust or a burning smell in your furnace room, it’s important to call a Druid Hills professional who can inspect and repair the problem before it becomes any worse. Not only can gas burner exhaust contain high levels of carbon monoxide, it can be bad for the device and the chimney if it doesn’t vent properly.

Tags: , , , , ,
Posted in Heating | Comments Off

How Do You Clean the Parts of a Heat Pump? A Question from Conyers

Friday, December 2nd, 2011

It is very important to keep your Conyers home’s heat pump clean. It improves efficiency, helps performance and prevents malfunctions. Cleaning your heat pump should be part of your home maintenance routine in order to keep the house as comfortable and worry-free as possible.

That is all well and good, but how do you go about cleaning the components of your heat pump. It’s one thing to advise you to clean, clean, clean…but it doesn’t do much good if you do not know how. To correct that, here are some tips to help you clean the different parts of your heat pump.

Caution: before doing any maintenance on your heat pump, including cleaning, be sure to turn off the power to the unit. This is a necessary safety measure.

Filters

  • If you use disposal air filters in your heat pump, skip this part. Just make sure to change them regularly, in accordance with the manufacturer’s instructions.
  • To clean air filters, follow the directions of the manufacturer that were included with the filter. This is also a good time to double check that the filters are installed properly.
  • Clean or replace your filters monthly during heavy use seasons, such as the warm summer months and cold months of late fall and winter.

Coils

  • Remove any debris from the outside of the coils and the surrounding area. Sticks and leaves may have accumulated near the outdoor coils, so just brush them away.
  • Using a soft brush attachment, vacuum the exterior of the coils. Take care not to bend or dent the coils.
  • Using a hose with a spray attachment, flush the coils with water from the inside out. This will remove any stubborn debris. Take care not to spray any electrical components, such as the fan or any nearby wires.
  • While you are inside the unit, vacuum the bottom inside to get rid of any more stray debris.

With that done, put everything back, replace the grille covers and power the heat pump back on. It should run smoothly with a fresh filter and no debris to gum up the works. Clean the coils every few months to keep the heat pump in tip top shape.

Tags: , , , , ,
Posted in Heat Pumps | Comments Off

5 Ways to Improve IAQ and Reduce Air Pollution: Some Tips From Commerce

Friday, September 9th, 2011

Your Commerce home could be a haven for pollutants that can cause irritation to the upper respiratory system of anyone who comes inside. These allergens and pollutants are easy to remove however by taking some simple steps such as the five listed below:

  1. HEPA Filtration – Step one is to use HEPA filtration to remove as much of what is on the floor as possible through vacuuming. HEPA vacuum cleaners can remove years of cleaners, solvents, dander, mineral build ups and other toxins that tend to accumulate in spaces that normal vacuums cannot reach. It may be a bit of an investment, but a high powered vacuum cleaner can have a tremendously positive impact on your lifestyle and reduce pollutants.
  2. Stop Outside Stuff from Coming In – Some of the worst pollutants your home will face are from outside. So, make sure you have doormats at every door and that your family and friends remove their shoes before coming inside. You can have a second mat inside as a friendly reminder that cleaning the shoes is not an option but a strict necessity.
  3. Humidity Helps – Humidity levels between 30% and 50% reduce the presence of dust mites, molds, bacteria and many other indoor pollutants. Air conditioning in the summer is helpful to reduce humidity. Additionally, look for sources of excess humidity like leaky pipes, standing water, or clothes drying.
  4. Radon Testing – We’ve recently discovered that Radon is the second leading cause of lung cancer in the United States each year and can be present in almost any home. It is not a location specific pollutant, so it’s important to have your indoor air tested for Radon as soon as you move into a new home. Once testing is done, have any problems repaired immediately.
  5. Cut the Chemicals – There are a number of high quality household cleaners that don’t contain chemicals. Avoid ammonia, bleach and other chemical laden cleaners that can inflame allergies and pollute the water supply. Your home will be just as clean and you won’t feel uncomfortable afterwards.

Proper cleaning and careful selection of compounds and what goes into your air will help you avoid creating new air quality problems in the house. Done right, this process will make everyone in your home feel more comfortable.

Tags: , , , , , ,
Posted in Indoor Air Quality | Comments Off

Finding an Ozone Friendly Air Conditioner: A Tip From Arcade

Monday, August 22nd, 2011

We’ve heard about ozone depletion in Arcade for almost 20 years as a major problem caused by a variety of chemicals we use almost every day. Propellants in aerosols, certain cleaning materials and the refrigerant in your air conditioning system are all culprits in the depletion of the ozone layer. So when you purchase a new AC unit, you want to be sure you won’t continue to contribute to the problem.

What Causes Ozone Depletion?

The number one contributor to ozone depletion is chloroflourocarbons, the man-made chemicals used in air conditioners since Thomas Midgley, Jr. invented the compound in the 1920s. When these chemicals reach the stratosphere, the ultraviolet light from the sun breaks the compound down to its base components, including chlorine atoms which subsequently break down thousands of molecules of ozone before dissipating.

The earliest CFCs used in air conditioners were incredibly damaging to the ozone. But since legislation was passed to stop the damage and new technologies were developed, there are less damaging alternatives.

Specifically, the refrigerant R410-A is considered environmentally friendly in that it doesn’t cause ozone depletion. Some air conditioners still ship with the older refrigerant R-22, however, which has been linked to ozone depletion and will no longer be allowed in new products after 2020.

Which Products Can You Buy?

When searching for a new air conditioner, look for a system that uses only R410-A. On average, these systems tend to cost more money, but keep in mind that in less than 10 years, refrigerants for older R-22 models will become much more sparse while R410-A will be an industry standard.

Of course, while R410-A doesn’t cause ozone depletion, it isn’t necessarily 100% environmentally friendly. It is still an HCFC and it contributes in smaller ways to global warming. To learn more about environmentally friendly air conditioning products, contact your local contractor.

Tags: , , , , ,
Posted in Air Conditioning | Comments Off

Portable Air Conditioners

Monday, June 27th, 2011

If you’re in the market for an air conditioner, you’re probably familiar with central and window air conditioning units. But did you know there was another option? While they’re not perfect for every situation, portable air conditioners can provide reliable, even cooling for many homes.

Advantages of Portable Units

Of course, the main reason to buy a portable air conditioner is that it’s, well, portable. With one of these units, you don’t have to worry about which room to put the air conditioner in. Instead, you can simply take it with you wherever you go in the house.

Many people like to keep a portable air conditioner in their bedroom to take the edge off at night without dropping the temperature as much as a window unit might. And most portable air conditioners are quieter to operate than common window units. Portable air conditioners also come in a wide variety of sizes, so you can easily find one that matches your needs.

Disadvantages of Portable Units

Unlike window air conditioners that are automatically installed to vent and drain outside of a building, a portable air conditioner requires special setup. That means that every time you move your unit, you’ll have to find somewhere to place the exhaust hose so that fumes don’t accumulate in the room. This also means that portable air conditioners can’t be used in rooms without access to windows or air vents.

The cooling power of most portable air conditioners is not quite on par with equivalent window units either. You’ll want to choose a portable unit with slightly more BTUs than if you were buying a window unit to take care of the same sized room. As a result, the portable unit may cost slightly more to operate during peak cooling months.

Extras to Look For

Of course, while the cost may go up slightly, there are a lot of benefits to owning a portable air conditioner. For instance, many portable air conditioners can be used independently to dehumidify a room without cooling. This is often helpful (and can save energy) when the temperature would be bearable if not for the humidity level.

You also want to make sure that your portable air conditioner really is portable. That means finding a model with wheels and handles or some other mechanism that makes it easy to move it from place to place.

Tags: , , ,
Posted in Air Conditioning | Comments Off

Why Install a Ductless Air Conditioner?

Friday, June 3rd, 2011

As you explore your options in terms of a new home air conditioning system, you will probably have to decide whether you want a system that uses ducts to get the cooled air around the house or one that is considered ductless. Each type of air conditioning system is appropriate in certain situations, so it is important to understand the benefits of each before you can make a decision.

Duct air conditioning systems are the more traditional type on the market today. They generally consist of an outdoor compressor and condenser unit and an indoor air handler. The outdoor unit passes the cooled air through ducts to the air handler, which then takes over circulating the air through the house and back out to the condenser again.

It makes sense to install this type of air conditioning system if you have a large house or if you have ducts already in place. Duct air conditioners can cool a moderate to large sized house quite effectively and they can also be coupled with zone control systems to give you multiple climate zones within your house.

Ductless air conditioners, as their name suggests, do not rely on a system of air ducts to get cooled air distributed throughout your house. Instead, these types of systems use refrigerant lines to transfer coolant from the outdoor compressor to the indoor, wall mounted units. Each of these indoor units can take care of cooling one or two rooms, but in order to cool an entire house with one of these systems, you will need to install multiple indoor units.

However, these multiple indoor units can all be connected to the same outdoor compressor, and they can also be controlled independently. That gives you much greater control over which parts of your house are cooled and how much energy you are using to cool areas that may or may not be occupied.

Ductless air conditioners are generally more energy efficient than ducted ones, but their real advantage comes from the facts that they can be installed even in places where air ducts do not exist or cannot go. If you do not already have ductwork in your house, installing a duct system will add considerably to the price of installing a ducted air conditioning system. In a case like this, a ductless system is much easier and cheaper to install and certainly makes more sense.

Tags: , , ,
Posted in Air Conditioning | Comments Off

Variety of Ways to Cool Your Home Naturally

Friday, May 20th, 2011

It is normal these days to simply switch on the air conditioning when the temperature begins to rise outside. But this can get expensive quickly, so it is a good idea to look into some alternative cooling methods as well. Fortunately, there are actually some great ways to help keep your home cool without touching that air conditioning at all. You will probably still want to have it around for extreme circumstances, but the less you need to use it, the more you will save in the long run.

Using fans, ceiling fans in particular, can certainly help to keep you cool on many moderate summer days. But they are far from the only options available. In fact, the design and composition of your house itself will have a lot to do with how easy it is to keep it cool all summer long.

One of the main reasons that your house gets so hot inside during the summer is that sunlight heats the air inside when it hits the walls, roof and windows. Closing your blinds will help to keep some of this out, but there will still be plenty of heat from the sun working to increase the indoor temperature.

What you really want to do to keep your house from heating up because of sunlight is to actively reflect the sun’s rays away from your home. You can do this by having light colored roofing and exterior paint or siding put on. While the dark colors typically used for this type of work absorb the vast majority of the sunlight that hits them, lighter colors will reflect it away.

This works well for the walls, but on your roof it can be a bit more difficult to stop the absorption of heat from the sun because of the nature of typical roofing materials. What you can do, however, is add a reflective coating like white latex on the roof. This will dramatically reduce the amount of heat that is able to come into your home in this way.

Also, natural shade can do a lot to keep sunlight from getting to your home to begin with. Planting trees close enough to your home that they will block out the sun but far enough away that they have room to grow will eventually help to keep your home much cooler without any extra work whatsoever.

Tags:
Posted in Air Conditioning | Comments Off