Posts Tagged ‘Atlanta’

« Older Entries

Atlanta HVAC Guide: Green Your Home Ideas

Monday, May 7th, 2012

Energy costs and depleted supplies force us to consider alternatives to how we lived 20 and 30 years ago. This transformation of thinking is most prevalent in our homes.  Not only are the habits of our lifestyles under consideration, but the very structure of our homes as well.  From materials to furnishings, houses are being transformed.

Remodel versus New Construction

The amount of open land available for development is less than before, so creativity is being utilized to design more compact developments, concentrating homes into multi-family structures and creating communities with shared spaces.

If you need more square footage for a growing family, staying put by increasing the footprint or adding a second story is viewed as more green than starting fresh on a new plot of ground.  In either case, careful consideration to the materials and systems used can have a significant impact on the environment.

Changing Habits and Habitats

From acoutrements to the house design itself, each decision to change an appliance or upgrade the finishes has greener impacts, no matter the choice of color.  Something so simple as converting light bulbs from incandescent to longer-lasting and more efficient compact florescents (the twisty tube ones) is becoming required in many communities and saves serious dollars in utility costs.

Hot water heaters can be combined with the boiler to share the energy.  More energy efficient glass can bring in more solar heat and light and hold it there longer.  Bamboo flooring only takes five years to grow, but can last 60, allowing our supply of trees to replenish.  Getting an energy efficient air conditioner can lower you energy bills during the summer.

Greening Your Home

Transforming the colors on our walls with odorless zero VOC  paints makes the chore fun to do yourself (instead of smelly and causing a headache), satisfying a need to feel accomplished and useful.  Composting left-over food to nourish our vegetable garden contributes to the effort of awareness far more emphatically than just flushing waste out of mind down the garbage disposal.

For information about how to make your Atlanta HVAC system more energy efficient, give Triad Mechanical a call today!

Tags: , , , , , ,
Posted in Air Conditioning, Energy Savings | Comments Off

Atlanta AC Repair Question: Why Is My Air Conditioner Not Cooling?

Monday, April 30th, 2012

Designed for one to two decades of life, air conditioners are able to run virtually trouble free with just a little maintenance annually.  If these little things like changing the air filter and cleaning the drain are not done regularly, the neglected units can really lose their ability to cool effectively.

The Basic Course

Through a process which involves the rapid evaporation and condensation of chemicals called refrigerants, air conditioners use compounds that have properties that allow them to change rapidly from gas to liquid and back again at low temperatures.

Heat is absorbed when the liquid evaporates and transforms into gas, making the space around it cooler.  Compressing it tightly together again, the heated gas condenses back into liquid with a residue of unwanted moisture that must be released and is vented usually to the outdoors.

The newly cooled air is distributed through the house by means of ductworks, pushed by fans driven by electric motors.  As the air moves along, it passes through a filter and can be further de-humidified.

Problems in the System

If the filter is clogged, movement of the cooled air is slowed to the point we might think the unit is broken.  If the condensate drain is plugged, the motor can get damaged and stop producing.  Regular maintenance performed by the home owner or as a service of  Triad Mechanical can avoid or eliminate these simple aggravations.

When the heat builds, however, and cool relief seems nowhere near the air ducts, it may be time to call an Atlanta HVAC professional to dig deeper to find the reason and suggest solutions.

Back to Cool

If not serviced regularly, the amount of refrigerant in the coils may decrease over time or the coils themselves could get clogged and impede the evaporation/condensation process.  A leak in the coils could drain the system, rendering the unit useless and wholly unproductive.

There are belts on each of the two separate fan motors which may be worn or loose, causing the fans to blow less efficiently.  The motor may need to be oiled or have a broken part that doesn’t allow it to push the air at all.

Most of the time, these fixes are relatively minor and do not threaten the life of the air conditioning unit.  Schedule an annual inspection and service from a certified Atlanta HVAC company like Triad Mechanical to take it off your list and stay cool.

Tags: , , , , , ,
Posted in Air Conditioning | Comments Off

Atlanta Air Conditioning Guide: Icing Problems on Air Conditioner Cooling Coils

Monday, April 23rd, 2012

Air conditioning cooling coil icing problems can arise for a couple of reasons: either the air filter has not been properly replaced, or there is a condensing coil leak.  It is best to check and test the easiest problem first and then move on from there.

It is important to replace air conditioning filters as often as is recommended by the manufacturer.  A common result of not replacing filters frequently enough is a buildup of dust and dirt on the filter, which causes reduced air flow throughout the air conditioning unit.  With reduced air flow, the evaporator coil or cooling coil within the air handler can become blocked by ice or frost build-up.  Having cooling coil icing can significantly reduce or completely stop the amount of cool air being produced by an air conditioning unit.

Easy steps to diagnose and resolve your Atlanta air conditioning cooling coil icing problems:

Visually inspect the air conditioning cooling coils to check whether reduced air flow has been caused by cooling coil icing.  If ice or frost is found on the coils, thus blocking air-flow, call a professional who will perform these steps.

  • Turn off the air conditioning system completely to allow ice to evaporate, the unit will have to remain off until all ice is completely melted and drained away from the unit
  • Unclog the condensate drain to ensure proper drainage of melting ice
  • Replace all dirty filters on the air conditioning unit
  • Once the a/c unit is de-iced and has fresh filters, it is safe to turn the system back on, to test whether the icy build-up happens again

If after completing these steps, when the air conditioning unit is turned back on the cooling coils do not ice-up, the unit runs normally and cool air runs smoothly through the system.

If after completing these steps, when the air conditioning unit is turned back on cooling coil icing happens again, this could mean one of two things.  Either too little of the refrigerant is being released into the cooling coil due to a clogged capillary tube or a stuck thermostatic expansion valve.  Or the refrigerant charge is too low due to a refrigerant leak.  A refrigerant leak can happen at any point in the refrigerant piping system which would then need to be soldered and resealed, or it can happen in the cooling coil or condensing coil which could mean the entire coil needs to be replaced.  Fixing of refrigerant leaks should be handled by an Atlanta HVAC professional.  Contact an experienced HVAC technicians at Triad Mechanical that can identify the air conditioner cooling coil icing problem and execute the proper solution.

 

Tags: , , , , ,
Posted in Air Conditioning | Comments Off

Duluth Heating and Cooling Guide: History of Heat Pumps

Monday, April 9th, 2012

Thermal energy is the natural movement from warm temperatures to colder temperatures creating energy in the change of temperature to the mass.  A heat pump typically is a device that moves the air (or other matter) in the opposite direction from its natural flow.

A heat pump often uses an intermediate fluid called a refrigerant which absorbs heat as it vaporizes and releases the heat when it is condensed,  using an evaporator to absorb the heat (or energy) from inside an occupied space and forcing this heat to the outside through the condenser. The key component that makes a heat pump different from an air conditioner is the reversing valve which allows for the flow direction of the refrigerant to be changed, allowing the heat to be pumped in either direction.

Timeless Technology

While mechanical movement of this energy, what we can actually call a pump,  has been a relatively recent invention,  the concept of this principal of physics has been in use since ancient times. Harnessing the power of geothermal energy (produced from the heat of the earth itself), natural hot springs “pumped” warm air into cool spaces in China and Europe thousands of years ago.

By 1852, Lord Kelvin had theorized the heat pump, but it took nearly 100 years to actually build one.  In the last half century, the technological advances have made heat pumps part of our lives in many ways.

First Pump

In the 1940s a man named Robert Webber was motivated to build the first known heat pump while tinkering with his refrigerator.  Accidently burning his hand on the outlet pipes of the cooling system, he was quite painfully awakened to an idea about the transference of heat.

Recognizing the freezer was constantly producing heat to cool its interior, he connected the outlet pipe to the storage tank of his hot water heater, extended that into a flow through pipes which heated air nearby, and  then used a fan to blow the warmth into another room.

The first heat pump was a crude, but effective method to provide comfort.  Creating a full-size version soon after, Wagner could heat his entire home.

Heat and Electricity

Today, Duluth heat pumps are built in many ways and shapes to heat or cool buildings of many sizes. As technological improvements are refined during this time of climate change and dwindling fossil fuels, heat pumps promise to play an important part in our futures.

For more information about any Duluth HVAC system, give Triad Mechanical a call today!

 

Tags: , , , ,
Posted in Air Conditioning, Heat Pumps | Comments Off

Atlanta Heat Pump FAQ: Why is Steam Rising from the Outdoor Unit of my Heat Pump?

Wednesday, March 21st, 2012

In the winter months, we often get calls from Atlanta customers about steam rising from the outdoor unit of their heat pumps, which is often mistaken for smoke. Steam rising from your outdoor unit is a normal during the heat pump defrost cycle. The defrost cycle prevents ice from accumulating on the outdoor coils.

Under normal conditions, your Atlanta heat pump should run without needing a defrost cycle. However, when temperatures drop near freezing, a sensor will set off the defrost cycle, during which the outdoor coils will heat up and melt any ice that has formed on the coils. During this cycle, you may see what can look like puffs of smoke, but it’s actually the steam caused by the coils melting the frost. The steam can appear to be denser if there’s excessive humidity or moisture in the air.

It is important to note that the defrost cycle should not last more than ten to fifteen minutes, and each cycle should only run every two hours or so. If you notice that the cycles last longer, run more often, or if you see ice on the outdoor coils of your heat pump after the cycle is finished, you may need a repair. Another concern is cooler temperatures in your home, which could indicate that the heat strips are not working properly during the defrost cycle.

Once the cycle is finished, the fan motor should come on again, but if it doesn’t come on several hours after the cycle, you should call us to send one a HVAC technicians to inspect your heat pump. There could be an issue with airflow, or a potential motor failure. When there’s a lack of adequate airflow, it can damage the compressor and other components. Call us any time you notice anything other than the normal steam rising from your heat pump during the winter.

There are some ways to prevent excess wear and tear on your heat pump during the winter. For instance, strong winds can greatly affect the performance of your heat pump and may cause abnormal defrost cycles. Make sure the outdoor components are protected from heavy wind by placing some type of natural or manufactured barrier around your heat pump, but be sure not to block the airflow. If you are buying a new heat pump, look for a model that has demand-defrost control. This feature helps to save energy by minimizing the defrost cycles.

Feel free to call Triad Mechanical if you have questions about your heat pump or Atlanta heating.

Tags: , , , , ,
Posted in Heat Pumps | Comments Off

Happy President’s Day from Your Greater Metro Atlanta Area HVAC Contractor!

Monday, February 20th, 2012

Everyone at Triad Mechanical wishes you a very happy President’s Day! We hope you all get a chance to take advantage of some of the great sales! It is also a great time to think about how you can make your community a better place. Lend a neighbor a helping hand or volunteer your time; everyone doing a little good can make a big difference!  Being more green is also a good way to help you community, and upgrading your HVAC system can be a big part of that. If you have an older system that is using a lot of fuel, a new system will not only save you money but also help you make your home more environmentally friendly, which is good for everyone.

One of the traditions of celebrating Presidents Day is food made with cherries, in honor of George Washington, so here is a great recipe for some Cherry-Blueberry Pie:

“A fruity and fun surprise awaits you inside this double crusted cherry and blueberry pie.”

INGREDIENTS:

1 (15 ounce) package refrigerated pie

crusts

1/2 cup white sugar

2 tablespoons cornstarch

1/4 teaspoon ground cinnamon

1 (21 ounce) can cherry pie filling

1 1/2 cups frozen blueberries

1 egg white

1 teaspoon water

2 teaspoons sugar

DIRECTIONS:

  1. Preheat the oven to 425 degrees F (220 degrees C).
  2. Press one of the pie crusts into a 9 inch pie plate. In a large bowl, stir together 1/2 cup of sugar, cornstarch and cinnamon. Stir in the cherry pie filling and blueberries. Spoon into the pie crust. Top with the second crust, and press the edges to seal. Flute edges, or press with the tines of a fork. In a cup, whisk together the egg white and water with a fork. Brush over the top of the pie, then sprinkle with 2 teaspoons of sugar.
  3. Bake for 45 to 55 minutes in the preheated oven, or until crust is golden brown. Cover the edges of the crust with aluminum foil if they appear to be getting too dark. Cool for at least 2 hours to allow the filling to set before serving.

This recipe is from allrecipes.com, visit their site for more details!

Tags: ,
Posted in Holiday | Comments Off

Atlanta Heating Contractor Guide: Which Fuel is Right for Your Home?

Wednesday, January 25th, 2012

Atlanta homeowners all want to save money on household expenses and utility bills. We turn off lights when we leave the room, take shorter showers and make sure the kids don’t keep the refrigerator door open. These small habits help, but still we all want to save a little wherever we can, right?

One area where people are constantly looking for ways to save money is home heating. Everyone wants to be comfortable and warm in their homes, but that costs money, so homeowners are always on the lookout for the most effective and cost efficient way to keep the house warm.

What is the most cost effective fuel for home heating?

Is it natural gas, electric, fuel oil or propane? How about less conventional heat sources like wood or geothermal pumps?

We all wish there was one easy, all-encompassing answer to this question, like a heating magic bullet that would keep every family warm and happy for pennies on the dollar. Unfortunately, there isn’t. It depends on too many factors for any one solution to work for everyone.

Probably the biggest factor that plays a role in the cost of a particular fuel is its local availability. Resources are available differentially, so that while one option might be cheapest for a family of five in Andover, Massachusetts, the analysis is entirely different for a single person in Kearney, Nebraska.

What is the most cost effective option for you?

That is a better question, but still not one that is necessarily easy to answer.

To figure it out, you need to carefully analyze several factors:

  • Local availability
  • Local climate
  • Size of your home
  • Existing heating equipment
  • Your budget

Armed with this information, you can do a careful comparison of the options available to you. For assistance you can use an online calculator to compare fuel costs, such as this one from the Energy Information Administration or this one from Hearth.com. Or, if all else fails, call a contractor for a professional assessment.

Comparing fuel costs and choosing the right solution for you may take some time, but the savings can be well worth it.

Tags: , , , ,
Posted in Heating | Comments Off

Atlanta Furnace Repair: Testimonial from Don D.

Wednesday, December 28th, 2011

When your heating breaks, you want to have the number of a heating and air conditioning contractor that you can trust. You don’t just need your furnace fixed quickly, you want to make sure that it is not going to break again and that you know exactly what went wrong. A good technician will walk you through the repair process and take preventative measures so your heating system will not fail again.

When you have a heating problem in the winter, it is also important to have a contractor that will come out day or night. That is why Triad, as part of our commitment to customer service, offers 24/7 emergency service. Here is what Don D. in Atlanta wrote to us about his furnace repair:

I called on Triad to fix the furnace in our new home. They were prompt, reliable and had reasonable rates. They stand behind their work. I ended up buying a service contract for both units in my home and I now see them twice a year for regular maintenance of the two systems. Very, very happy and trustworthy!

- Don D.

Thanks Don! Regular maintenance will cut down on future repairs and keep your system running as efficiently as possible. It is one of the easiest things you can do to make sure that your furnace will last for years to come!

Tags: , ,
Posted in Heating | Comments Off

Easy Ways to Lower Your Heat Pump’s Energy Bill in Atlanta

Wednesday, November 30th, 2011

One of the biggest advantages of having a heat pump in your Atlanta home is that it is highly efficient for both heating and cooling. There is always room for improvement, though, so here some tips to lower your energy bill even more:

  • Get it checked. It’s been said many times before, but it’s always worth saying again: consistent maintenance is one of the biggest keys to keeping any appliance running efficiently. Get your heat pump inspected by a professional at least once a year. This will keep it in good shape and provide an opportunity to make small repairs, before they have a chance to turn into big problems.
  • Keep it clean. When it comes to HVAC equipment, a clean unit is an efficient unit. Check and replace the filters regularly, according to the manufacturer’s instructions. Keep the coils and fan clean. This will also be part of the annual maintenance, but you can – and should — do touch up cleaning on your own.
  • Install a thermostat. A programmable thermostat is a great energy efficiency tool for any home heating and cooling system, not just a heat pump. A thermostat will keep the temperatures lower during the day or any time no one is home, so that you are not wasting heat.
  • Let it run. It may seem counterintuitive, but turning off a heat pump to save energy may actually do more harm than good. Heat pumps operate most efficiently when they stay running on a regular basis. The components don’t need to take time to spin up, and the refrigerant stays warm so it can keep moving. Your best bet is to have your heat pump connected to a programmable thermostat, program it and then stop thinking about it. You’ll save a bundle over manual operation.
  • Protect the outdoor unit. The outdoor portion of your heat pump has to put up with a lot from the elements. Strong winds can damage them or negatively impact the efficient operation of the pump, so keep the outdoor unit protected from wind.

These simple measures, in combination with a highly efficient heat pump, will help slash your energy bills. In addition, check to see if your heat pump is eligible for a federal tax credit, which can save you even more money.

Tags: , , , , ,
Posted in Heat Pumps | Comments Off

Malfunctioning Heat Pump Tips (and Happy Halloween Weekend!)

Friday, October 28th, 2011

Everyone at Triad Mechanical wishes you a Happy Halloween Weekend! Have a great time as a ghost, a goblin, or anything in between! And since nothing is more scary than when you heating system stops working, here are some things you should do if you have a malfunctioning heat pump.

In a perfect world, you would never have to worry about things like malfunctions or repairs. Everything would just work without ever needing to be maintained or fixed, and you could spend your time on energy on more enjoyable pursuits.

Unfortunately, no such perfect world exists. Things wear out and break down, often at the least opportune time. And of course, your heat pump is not immune. Despite being a great all around machine, a heat pump can malfunction, just like anything else.

But how can you know whether your heat pump is not working right? Here are some signs and symptoms that are often indicative of common heat pump problems:

  1. Too Much Noise – Whether emanating from your car or your usually quiet heat pump, noises are often the first sign that something is amiss. You should expect your heat pump to make some noise; the compressor and air handler are two culprits. However, if it starts making more noise than it did before, something may be up. Sometimes this is as simple as some loose fittings, but it’s still something that should be checked out.
  2. The House Is Too Cold – Obviously, if you get a heat pump to heat your house, you expect it to do just that. So, if your home is too chilly, you know something is amiss. If it’s way too cold, the heat pump may not be running at all, which can be the result of a serious malfunction. If it is only a few degrees below where you set it, it may be a different problem. It could be that something is malfunctioning in the heat pump, but it could also be that the outside air is too cold for the heat pump to keep the house warm. In that case, the best solution is supplemental heating.
  3. The Heat Pump Turns Off Too Soon – If your heat pump seems to be shutting off too quickly, it may be short cycling. That means that it is turning off before getting through its entire heating or cooling cycle. Frequently this is simply caused by dirt or debris around the outdoor coil, in the air handler or in the filter. Check these areas out and clean them. In general, you will want to keep the various components of your heat pump clean in order to ensure the best performance.

These are just some of the main symptoms of common problems. Other things can go wrong with your heat pump, although it is not very likely. As a general rule, if you notice your heat pump performing strangely or doing something it hasn’t done before, it’s best to get it checked out by a professional.

Tags: , , , , , ,
Posted in Heat Pumps | Comments Off

« Older Entries