Posts Tagged ‘Athens’

Atlanta Heat Pump FAQ: Why is Steam Rising from the Outdoor Unit of my Heat Pump?

Wednesday, March 21st, 2012

In the winter months, we often get calls from Atlanta customers about steam rising from the outdoor unit of their heat pumps, which is often mistaken for smoke. Steam rising from your outdoor unit is a normal during the heat pump defrost cycle. The defrost cycle prevents ice from accumulating on the outdoor coils.

Under normal conditions, your Atlanta heat pump should run without needing a defrost cycle. However, when temperatures drop near freezing, a sensor will set off the defrost cycle, during which the outdoor coils will heat up and melt any ice that has formed on the coils. During this cycle, you may see what can look like puffs of smoke, but it’s actually the steam caused by the coils melting the frost. The steam can appear to be denser if there’s excessive humidity or moisture in the air.

It is important to note that the defrost cycle should not last more than ten to fifteen minutes, and each cycle should only run every two hours or so. If you notice that the cycles last longer, run more often, or if you see ice on the outdoor coils of your heat pump after the cycle is finished, you may need a repair. Another concern is cooler temperatures in your home, which could indicate that the heat strips are not working properly during the defrost cycle.

Once the cycle is finished, the fan motor should come on again, but if it doesn’t come on several hours after the cycle, you should call us to send one a HVAC technicians to inspect your heat pump. There could be an issue with airflow, or a potential motor failure. When there’s a lack of adequate airflow, it can damage the compressor and other components. Call us any time you notice anything other than the normal steam rising from your heat pump during the winter.

There are some ways to prevent excess wear and tear on your heat pump during the winter. For instance, strong winds can greatly affect the performance of your heat pump and may cause abnormal defrost cycles. Make sure the outdoor components are protected from heavy wind by placing some type of natural or manufactured barrier around your heat pump, but be sure not to block the airflow. If you are buying a new heat pump, look for a model that has demand-defrost control. This feature helps to save energy by minimizing the defrost cycles.

Feel free to call Triad Mechanical if you have questions about your heat pump or Atlanta heating.

Tags: , , , , ,
Posted in Heat Pumps | Comments Off

Athens Heating Guide: Basic Boiler Maintenance

Friday, January 20th, 2012

The boiler in your Athens home is a sensitive piece of equipment that needs routine maintenance and repairs. Regularly maintaining your boiler is especially important for safety reasons. Many boiler malfunctions and accidents are due to neglecting some of these basic tasks.

Even if you’ve just installed a new boiler, the safety valves and settings should be checked by a professional on a regular basis to prevent a breakdown or hazard. We recommend that you schedule a boiler inspection and cleaning at least once a year. Call Triad Mechanical if you have any questions about boiler maintenance.

An Athens service technician will measure the pressure, drain and remove sediment buildup, test the efficiency ratings, and make sure your boiler is set at the right temperatures. Regular maintenance can also help you determine whether or not you need a boiler replacement. By keeping track of performance levels, you will be able to tell when it’s time for an upgrade.

Other tasks performed during an annual maintenance visit include cleaning and lubricating all the components, checking for any leaks or clogs, and testing gas boilers for any carbon monoxide intrusion. If you have any gas appliances in your home, you should always have carbon monoxide detectors and test them once a month.

Boiler pressure is something that you can check often on your own. If you aren’t sure how to read the pressure gauge, or if you aren’t sure what the right pressure should be, just call one of our technicians to walk you through this process.

Always call Triad Mechanical if you have any problems with the boiler in your Athens home. We are here to help and answer any questions you may have.

Tags: , , , , , ,
Posted in Heating | Comments Off

Components of a Heat Pump: A Guide from a Commerce Heating Contractor

Monday, November 21st, 2011

Because of their simply designed function – pumping heat one way or the other – heat pumps have relatively few components. However, these components do not work the way you might expect, if you are picturing, for example, a fan that blows heat in or out.

A heat pump operates on the same principle as the air conditioner or refrigerator in your Commerce home, which may seem complicated at first, but it’s not. The heat pump consists of five main functional components, which are outlined below:

  1. The coils absorb heat from the surrounding air and channel it in or out of the home. There are two different types of coils in a heat pump. Condenser coils are outside the home transferring heat to and from the outside air. Evaporator coils are the reverse, transferring heat to and from the air inside the home.
  2. The coils are filled with a refrigerant, which is the medium that carries heat into or out of the home. On a cold day, for example, when the heat pump is in heating mode, the refrigerant in the condenser coils will absorb heat from the outside air, the flow inward into the evaporator coils, warming the interior of the house.
  3. The compressor pressurizes the refrigerant so that it is able to readily absorb as much heat from the air as possible. This is how your heat pump is able to gather warm air from the chilly outdoors to keep your home warm.
  4. The reversing valve is the component that changes the flow of the refrigerant when switching from heating mode to cooling mode, or vice versa.
  5. Finally, the air handler is the fan component that distributed the heat throughout the house via your home’s ductwork.

While these are the five main components, there are several smaller parts involved within and alongside each of these, as well. You need not concern yourself with them, since you won’t have occasion to interact with them. A professional will be able to identify and repair any of the components of a heat pump as needed.

In addition to these five primary components, most heat pumps also include a heater pack, which is a bunch of actual heating elements for use when the heat pump cannot operate on its own. For example, you would turn on the “Emergency Heat” setting of your heat pump after a power outage to warm the refrigerant before use. That setting is supported by the heater pack.

Tags: , , , , ,
Posted in Heat Pumps | Comments Off

Common Types of Air Cleaning Devices: A Tip From Athens

Monday, September 12th, 2011

In recent years in Athens, you’ve likely heard dozens of warnings from newscasters, community publications and local contractors about the dangers of indoor pollutants. That’s a good thing – the air in your home, if left untreated, can be a significant health risk to you and your family. But, how do you choose an air cleaner that will get the job done? Let’s take a closer look at the options currently available and what each of them has to offer.

Air Filters

Air filters are the simplest form of air cleaning. They are designed to capture particles that stay airborne long enough to reach the filter. They don’t work well to capture all large particles, however, because they tend to settle before they reach the filter device. Proper air flow is necessary to supplement the process and remove more pollutants.

High efficiency filters with an MERV rating of 14 or higher are recommended, though HEPA filters (which have an MERV of 17-20) are preferred for their ability to capture particles as small as 0.3 microns. In-duct particle removal is a good upgrade as well because it filters moving air and captures more particles.

UVGI

UV germicidal lights are designed to kill pollutants like bacteria and mold. They are usually installed in the ductwork or air cleaner and while the effectiveness of either has yet to be properly measured there is a growing trend to include them in systems where homes experience a large number of allergic reactions or asthma symptoms.

Ozone Generators

There are still some systems that produce ozone as they circulate air back and attract it to a filter for removal. The results are mixed and ozone itself can be a significant irritant to the lungs, so it’s unclear whether these actually work very well (we would not recommend them).

Which Is Best?

It really depends on the pollutants you’re trying to remove. The best course of action is to discuss with a contractor the best combination of technologies to remove pollutants from your indoor air.

Tags: , , , ,
Posted in Indoor Air Quality | Comments Off

Ultra Violet Lighting

Friday, July 8th, 2011

With a state of the art home comfort system in place, complimented by a high tech indoor air cleaner, you may think you’re set to take on climate and contaminant related challenges to your air quality. But you’re probably missing one thing, and that’s the ability to remove living contaminants like bacteria and viruses from your indoor air.

Unlike non-living particulate indoor air contaminants, bacteria and viruses are not easily caught by indoor air filters or ionizers. They often slip through and continue to circulate again and again through your home, greatly increasing the likelihood that you and your family will get sick. They also tend to reproduce, so the longer you go without eliminating these germs, the more of them there will be.

Killing those Germs for Good

Fortunately there is a technological solution to this indoor air quality problem. The inclusion of ultra violet lights into your air purification system not only specifically targets bacteria and viruses; it helps to slow the spread of disease when someone in your home gets sick.

UV germicidal lights are extremely effective at removing all types of living contaminants from your indoor air. Unlike HEPA filters and air ionizers, UV germicidal lights don’t try to remove these contaminants by trapping them. Instead, they kill them outright, making sure that the germs can’t stick around to reproduce or work their way free of the containment system.

Installation and Maintenance

For most indoor air contaminants, you want to have someone test your air first. However, with bacteria and viruses, you can rest assured that they are always in the air around you. It often only takes a smaller number of pathogens to make someone ill.

Most UV germicidal lights are easy to integrate into your existing indoor air cleaning system. They are usually installed just past the filters so they can catch the germs without other indoor air contaminants getting in the way. And best of all, UV germicidal lights require very little attention or maintenance.

Simply put them in place and let them do their work. You should schedule a routine maintenance visit every so often to make sure that no part of your indoor air cleaning system needs to be repaired or replaced. But other than that, installing UV germicidal lights in your home allows you to relax and enjoy a completely contaminant free living environment.

Tags: , , , ,
Posted in Indoor Air Quality | Comments Off

What Is the Energy Star Label?

Wednesday, May 25th, 2011

Any time you go out and buy any type of appliance, you probably notice that some have a distinct mark that signifies them as Energy Star appliances. That sounds like a good thing, of course, but what does it actually mean? Should you always buy an Energy Star model over another type?

The Energy Star label was originally developed to help consumers more easily recognize appliances that are more energy efficient than the average. In order to obtain an Energy Star seal of approval, any device must meet very strict guidelines when it comes to energy efficiency.

What that translates into for you as a consumer is a lower monthly energy bill when you buy Energy Star appliances. Of course, once they have obtained an Energy Star labels, manufacturers can charge whatever they want for their product, and it is not unusual to pay more for a model that is certified an Energy Star.

However, as long as the potential savings over time that you will get by using the Energy Star model as opposed to one that is not as energy efficient outweigh the difference in initial purchase price, it is worth it to spend a bit more on the Energy Star model.

Keep in mind, though, that just because a produce meets the Energy Star guidelines for energy efficiency does not necessarily mean that it is a superior product in terms of quality or overall effectiveness. Plus, not all Energy Star appliances are created equal. You should still do your research and pick out the product that will both save you the most money and has the best chance of getting the job done right.

Another benefit to Energy Star products is that, because they use less energy when they run, they also have a smaller impact on the environment than a model that uses a greater amount of energy to perform the same tasks.

Overall, it is definitely worth taking a closer look at all of the Energy Star options out there when you are purchasing an air conditioning system or any other type of appliance. Using less energy is always a good thing both for your bank account and for the planet. But you also want to make sure you are actually getting the best product for your money.

Tags: , , ,
Posted in Air Conditioning | Comments Off

Maintenance: Why You Should Have Your Furnace Serviced Every Heating Season

Wednesday, April 13th, 2011

Particularly if you’ve just purchased a new furnace, it’s probably not something you think about all that much. As long as it works when you need it to, that is. Unfortunately you usually find out that something is wrong with your furnace just when you need it most. However, there is a way to avoid that kind of problem, and many others, and that’s to have regular maintenance service performed on your furnace by a home heating professional every year.

One of the main reasons to have your furnace serviced is that it allows technicians to catch small problems before they become large ones. During a typical maintenance visit, a technician will examine all parts of your furnace to ensure that they are still in good working order. He’ll also thoroughly clean out the unit to make sure there are no buildups of debris that could cause problems or impede the furnace’s energy efficiency.

And if they do find something wrong like a part that’s beginning to wear out or something that just isn’t working properly, the technician can make the necessary repairs right away. You can get the problem taken care of ahead of time and you won’t have to worry about going without heat during the coldest part of the winter.

That’s not the only reason that annual maintenance is important and beneficial, however. It can also help you save money, both on your monthly energy bills and in the long term. That’s because annual maintenance tune ups keep your furnace functioning at peak efficiency levels longer than they would be able to otherwise.

A typical furnace will lose a small percentage of its energy efficiency every year, and while it won’t seem like a lot at first, that can really add up over the course of a couple of years. With regular maintenance, though, you can often maintain up to 95% of your furnace’s original efficiency for the life of the furnace.

Plus, when the proper maintenance and service is performed on a regular basis, your furnace will simply last longer. Most furnaces purchased now will last between 10 and 15 years, and with proper care, you can help to ensure that your furnace reaches the upper limit of this span or even beyond.

Tags:
Posted in Maintenance Plan/Comfort Club, Uncategorized | Comments Off